You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

BOSCH REXROTH
0811402050

$5,587.79 USD
  • BOSCH REXROTH
  • Material:0811402050
  • Model:DREB6X-1X/75MG24-25Z4M

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DREB6X-1X/75MG24-25Z4M (0811402050) is a state-of-the-art proportional pressure reducing valve, meticulously engineered for precision and reliability. This pilot-operated valve features a 3-way main stage design and is equipped with a DBV pilot stage that ensures flow-controlled internal pilot oil supply exclusively via port P. The operation of the valve is governed by a position-controlled proportional solenoid, which interacts with a spring to achieve rapid actuation times and minimal hysteresis of less than 1%. This advanced mechanism allows for seamless pressure adjustment in port A (actuator), enabling users to finely tune the pressure to their specific requirements without steps. Designed for reducing system pressure at the actuator with an internal pilot oil supply, the DREB6X-1X/75MG24-25Z4M valve boasts an adjustable feature through the positional alteration of the solenoid armature relative to the compression spring. This ensures maximum control and responsiveness. Additionally, it provides maximum pressure limitation as a safety measure, maintaining functionality even in cases where the electronics may be compromised. The valve is intended for subplate mounting and conforms to ISO 4401 standards regarding porting patterns. Such a configuration makes it ideally suited for integration into various hydraulic systems requiring precise pressure modulation. Its robust construction and sophisticated design make it an essential component for applications demanding high levels of accuracy and dependability in pressure regulation.

Proportional pressure reducing valves of type DREB6X are pilot-operated; the main stage is a 3-way version. The pilot control valve (DBV pilot stage) has a flow-controlled internal pilot oil supply via P. Operation is effected by means of proportional solenoid which is position-controlled and acts on a spring. This results in short actuating times with minimum hysteresis. Dependent on the solenoid current, the pressure in A (actuator) can be steplessly set and reduced using these valves.

01

02

03

04

05

06

07

08

09

10

DREB6

X

–

1X

/

M

G24

–

25

Z4

M

*

01

Proportional pressure reducing valve in 3-way version with inductive position transducer, pilot-operated

DREB6

02

Porting pattern according to ISO 4401-03-02-0-05

X

03

Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions)

1X

Maximum pressure rating

04

Up to 75 bar

75

Up to 175 bar

175

Up to 310 bar

310

05

Without check valve

M

Supply voltage of the control electronics

06

Direct voltage 24 V

G24

Solenoid type (current)

07

Solenoid current maximum 2.5 A

25

Electrical connection

08

Connector according to DIN 43650-AM2
Mating connector included in the scope of delivery

Z4

09

NBR seals, suitable for mineral oil HL and HLP according to DIN 51524

M

10

Further details in the plain text

*

For applications outside these parameters, please consult us!

general

Type

DREB6X

Size

6

Component series

1X

Installation position

any

Weight

kg

2.4

Ambient temperature range

°C

-20 … +50

hydraulic

Type

DREB6X

Size

6

Maximum operating pressure

bar

315

Maximum operating pressure

Port P

bar

315

Port T

bar

250

Pilot flow

l/min

≈ 0.6

Maximum flow

l/min

40

Hydraulic fluid temperature range

°C

-20 … +80

Viscosity range

mm²/s

10 … 800

Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 1)

Class 18/16/13 according to ISO 4406 (c)

Hysteresis

%

≤ 1

Manufacturing tolerance of the command value pressure characteristic curve

%

≤ 10
1) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.

electrical

Type

DREB6X

Maximum solenoid current

A

2.5

Solenoid coil resistance

Cold value at 20 °C

Ω

3

Duty cycle

%

100

Protection class according to DIN EN 60529

IP65