You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

BOSCH REXROTH
0811402152

$7,891.14 USD
  • BOSCH REXROTH
  • Material:0811402152
  • Model:5WRP10F1B70L-2X/G24Z4/M-754

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth DREBE10Z-1X/315XYMG24K31A1M (0811402152) is a state-of-the-art proportional pressure reducing valve designed for precise system pressure limitation. This valve is characterized by its pilot operation and the integration of position-controlled proportional solenoid with on-board electronics. The DREBE10Z-1X/315XYMG24K31A1M features a logic element, or spool valve, which is situated within the valve housing and operates in a "normally open" configuration. The sophisticated design of this Bosch valve allows for fine-tuned adjustments through the position of the solenoid armature relative to the compression spring, delivering exceptional control over pressure reduction with minimal hysteresis of less than 1%. This results in short actuating times, ensuring rapid response to system demands. Additionally, it provides maximum pressure limitation reliability, maintaining effectiveness even in scenarios where the electronics may be compromised. Constructed for subplate mounting, this valve adheres to the porting pattern standards set by ISO 5781-AG-06-2-A. The internal pilot oil operation and integrated electronics make it an ideal component for applications that require consistent and accurate pressure management. With its robust design and advanced capabilities, the Bosch DREBE10Z-1X/315XYMG24K31A1M (0811402152) pressure reducing valve is engineered to deliver high performance and reliability for various hydraulic systems requiring precise pressure regulation.

Proportional pressure reducing valves of type DREBE10Z are pilot-operated pressure reducing valves and are used for system pressure limitation. They are actuated by a position-controlled proportional solenoid with integrated electronics. A logic element (spool valve) is located in the valve housing in the “normally open” version, pilot-operated in poppet seat version.

01

02

03

04

05

06

07

08

09

10

11

12

13

DREB

E

10

Z

–

1X

/

XY

M

G24

K31

A1

M

*

01

Proportional pressure reducing valve with inductive position transducer at the poppet

DREB

02

With integrated electronics (OBE)

E

03

Size

10

04

Porting pattern according to ISO 5781-AG-06-2-A

Z

05

Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions)

1X

Maximum pressure rating

06

Up to 180 bar

180

Up to 315 bar

315

07

Bleed port X, pilot oil port Y

XY

08

Without check valve

M

Supply voltage of the control electronics

09

Direct voltage 24 V

G24

Electrical connection

10

Connector according to DIN 43563-AM6
Mating connector separate order

K31

Electrical interface

11

Command value 0 … 10 V

A1

12

NBR seals, suitable for mineral oil HL and HLP according to DIN 51524

M

13

Further details in the plain text

*

For applications outside these parameters, please consult us!

general

Type

DREBE10Z

Size

10

Component series

1X

Installation position

any

Weight

kg

7.8

Ambient temperature range

°C

-20 … +50

hydraulic

Type

DREBE10Z

Size

10

Maximum operating pressure

bar

315

Maximum operating pressure

Port A

bar

315

Port B

bar

315

Port X 1)

bar

315

Pilot flow

l/min

≤ 0.8

Maximum flow 2)

l/min

120

Hydraulic fluid temperature range

°C

-20 … +70

Viscosity range

mm²/s

10 … 800

Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 3)

Class 18/16/13 according to ISO 4406 (c)

Hysteresis

%

≤ 1

Manufacturing tolerance of the command value pressure characteristic curve 2)

%

< ± 5
1) Bleed port
2) See characteristic curves
3) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.

electrical

Type

DREBE10Z

Power supply

Nominal voltage

V

24

Lower limit value

V

21

Upper limit value

V

40

Duty cycle

%

100

Protection class according to DIN EN 60529

IP65

Conformity

CE conformity according to EMC directive 2004/108/EC tested according to EN 61000-6-2 and EN 61000-6-3