SUN HYDRAULICS
CNDCLBN
$41.00 USD
- SUN HYDRAULICS
- Material:CNDCLBN
- Model:CNDC-LBN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CNDCLBN (CNDCLBN) is a high-performance check valve designed for hydraulic applications requiring reliable, directional flow control. This model features a free flow from port 1 to port 2, while incorporating a customer-specified orifice to restrict flow from port 2 to port 1, effectively managing fluid movement in hydraulic systems. The specified orifice range for this valve is between 0.016 - 0.107 inches (0.4 - 2.7 mm), allowing for customization based on specific application requirements. Constructed to withstand pressures up to 5000 psi (350 bar) at both ports, the CNDCLBN is suitable for high-pressure environments. Its robust design includes Sun Hydraulics' floating style construction which minimizes internal binding risks caused by excessive installation torque or variations in cavity/cartridge machining. The valve's cavity type is T13A and it belongs to Series 1, with a capacity of handling up to 15 gpm (60 L/min). The hex size of the valve is designed at 7/8 inches (22.2 mm), and it requires an installation torque of between 30 - 35 lbf ft (41 - 47 Nm). For enhanced durability in corrosive environments, corrosion-resistant variants can be identified by specific model code suffixes like AP or LH. Additionally, the CNDCLBN uses Viton seals for improved resistance against high temperatures and chemical degradation, ensuring long-term reliability and performance in challenging industrial conditions. This model is particularly suitable for applications where precise fluid control and reliability are critical under varying pressure conditions.
The Sun Hydraulics CNDCLBN (CNDCLBN) is a high-performance check valve designed for hydraulic applications requiring reliable, directional flow control. This model features a free flow from port 1 to port 2, while incorporating a customer-specified orifice to restrict flow from port 2 to port 1, effectively managing fluid movement in hydraulic systems. The specified orifice range for this valve is between 0.016 - 0.107 inches (0.4 - 2.7 mm), allowing for customization based on specific application requirements. Constructed to withstand pressures up to 5000 psi (350 bar) at both ports, the CNDCLBN is suitable for high-pressure environments. Its robust design includes Sun Hydraulics' floating style construction which minimizes internal binding risks caused by excessive installation torque or variations in cavity/cartridge machining. The valve's cavity type is T13A and it belongs to Series 1, with a capacity of handling up to 15 gpm (60 L/min). The hex size of the valve is designed at 7/8 inches (22.2 mm), and it requires an installation torque of between 30 - 35 lbf ft (41 - 47 Nm). For enhanced durability in corrosive environments, corrosion-resistant variants can be identified by specific model code suffixes like AP or LH. Additionally, the CNDCLBN uses Viton seals for improved resistance against high temperatures and chemical degradation, ensuring long-term reliability and performance in challenging industrial conditions. This model is particularly suitable for applications where precise fluid control and reliability are critical under varying pressure conditions.
Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specified orifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Valves with the opposite flow path (free flow from 2 to 1) are considered flow controls and may be found listed as fixed orifice, non-pressure compensated flow control valve with reverse flow check.
- The customer specified orifice diameter is stamped on one of the cartridge's hex faces.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 15 gpm60 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Orifice Range | .016 - .107 in.0,4 - 2,7 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ