SUN HYDRAULICS
CNDCXAN
$33.06 USD
- SUN HYDRAULICS
- Material:CNDCXAN
- Model:CNDC-XAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CNDCXAN (CNDCXAN) is a high-performance cartridge valve designed for hydraulic systems requiring reliable check valve capabilities with a bypass orifice. This model allows free flow from port 1 to port 2, while a customer-specified orifice restricts flow from port 2 to port 1, making it versatile for various applications. The specified orifice diameter is conveniently stamped on one of the cartridge's hex faces for easy identification. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of up to 15 gpm (60 L/min), the CNDCXAN is suitable for heavy-duty operations. The valve fits in a T13A cavity and adheres to Series 1 specifications. It features Sun\u2019s floating style construction which minimizes internal parts binding\u2014a common issue due to excessive installation torque or cavity/cartridge machining variations. This model also incorporates corrosion-resistant features, making it ideal for use in environments where corrosion is a concern. For installation, the valve requires an installation torque between 30 - 35 lbf ft (41 - 47 Nm) and utilizes Viton seals (990010006) for enhanced durability and performance under various conditions. The CNDCXAN serves as an efficient solution for systems needing precise flow control and check functionality in one compact unit.
The Sun Hydraulics CNDCXAN (CNDCXAN) is a high-performance cartridge valve designed for hydraulic systems requiring reliable check valve capabilities with a bypass orifice. This model allows free flow from port 1 to port 2, while a customer-specified orifice restricts flow from port 2 to port 1, making it versatile for various applications. The specified orifice diameter is conveniently stamped on one of the cartridge's hex faces for easy identification. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of up to 15 gpm (60 L/min), the CNDCXAN is suitable for heavy-duty operations. The valve fits in a T13A cavity and adheres to Series 1 specifications. It features Sun\u2019s floating style construction which minimizes internal parts binding\u2014a common issue due to excessive installation torque or cavity/cartridge machining variations. This model also incorporates corrosion-resistant features, making it ideal for use in environments where corrosion is a concern. For installation, the valve requires an installation torque between 30 - 35 lbf ft (41 - 47 Nm) and utilizes Viton seals (990010006) for enhanced durability and performance under various conditions. The CNDCXAN serves as an efficient solution for systems needing precise flow control and check functionality in one compact unit.
Free-flow, nose-to-side check valves with a bypass orifice allow free flow from port 1 to port 2. A customer specified orifice is included to restrict flow from port 2 to port 1. See technical data below for orifice range.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Valves with the opposite flow path (free flow from 2 to 1) are considered flow controls and may be found listed as fixed orifice, non-pressure compensated flow control valve with reverse flow check.
- The customer specified orifice diameter is stamped on one of the cartridge's hex faces.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 15 gpm60 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Orifice Range | .016 - .107 in.0,4 - 2,7 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ