SUN HYDRAULICS
CTE

$271.13 USD

SUN HYDRAULICS
Material:CTE
Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CTE (CTE) is a robust hydraulic manifold designed for efficient fluid control in various applications. This subplate body type manifold adheres to the ISO 08 interface standard and features specific body characteristics that include P to T flow paths with manifold T and Y ports. It is equipped with one open cavity, identified as T3A, and supports a port size of 1 NPTF. The manifold is constructed from 6061T651 aluminum, known for its excellent corrosion resistance and relative strength, making it suitable for demanding environments where durability is crucial. While Sun Hydraulics does not anodize their aluminum bodies due to reasons such as cost, logistics, and potential reduction in fatigue life, the inherent properties of 6061 aluminum provide sufficient corrosion protection without additional treatment. The design of this hydraulic manifold allows for seamless integration into systems requiring reliable fluid routing and management.

Description

Body Type	SubplateSubplate
Interface	ISO 08ISO 08
Body Features	P to T, manifold T and Y portsP to T, manifold T and Y ports
Open Cavities	11
Cavity	T-3A
Port Size	1" NPTF1" NPTF

Show FAQ

How big is a drop of hydraulic oil?	There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Why does Sun use 6061 aluminum?	6061-T651 is relatively strong, relatively inexpensive, difficult to machine, readily available in all shapes and sizes and very corrosion resistant. 2024 is stronger and machines beautifully, but is expensive and falls to pieces in a corrosive environment.
Why doesn't Sun anodize their aluminum bodies?	Reasons to anodize: To increase corrosion resistance. Sun uses 6061-T651 aluminum. It is one of the most corrosion resistant aluminum alloys there is. Whether or not anodizing improves the corrosion resistance of 6061 aluminum is debatable. We have yet to have a manifold returned because of corrosion. Appearance (color). The 2 colors that would appeal to Sun would be blue or black. Unfortunately these are the colors that are hardest to do consistently. To provide a hard wear surface. Sun does not make parts-in-body valves. The manifold is just plumbing. We don't need a wear surface. Because everyone else does it. Bad reason. Reasons to not anodize: Cost. It's another process. Logistics. When you make tens of thousands of manifolds a month and you anodize hundreds, it's a problem. Consistency. See above. Stamping. After a body is anodized you cannot do any more stamping without making a mess.Inspection. Have you ever tried to look for burrs in a black anodized body? It's the old blackboard factory at night scenario. Torque. You will experience an increase in breakaway torque when removing items from an anodized manifold. Fatigue life. This is the best reason to not anodize. Fatigue failure is a very complex phenomenon. What it takes to initiate a crack is difficult to predict. What it takes to propagate a crack is readily defined. Anodizing produces a very thin, very hard, and very brittle surface on aluminum. The first time you pressurize an anodized aluminum manifold you have initiated fatigue cracks. Whether or not the stress is enough to propagate the cracks is a matter of pressure and manifold geometry. Anodizing an aluminum manifold grossly reduces the fatigue life by anywhere from 20% to 50%.

SUN HYDRAULICSCTE

SUN HYDRAULICS
CTE