SUN HYDRAULICS
CXADCAV
$44.98 USD
- SUN HYDRAULICS
- Material:CXADCAV
- Model:CXAD-CAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXADCAV (CXADCAV) is a high-performance check valve designed for hydraulic applications requiring reliable, unidirectional flow control. This model facilitates free flow from the inlet port 2 to the outlet port 1 while effectively blocking flow in the reverse direction. Specifically engineered for scenarios where manifold drillings may be incorrect, these check valves serve as essential circuit savers by accommodating existing circuit layouts without the need for extensive modifications. The CXADCAV operates under a maximum pressure of 5000 psi (350 bar) at both ports and offers a selection of cracking pressures at 4, 30, and 75 psi (0.3, 2, and 5 bar), making it versatile for various hydraulic pressures. It features a T162A cavity and belongs to Series 0, with a fluid capacity of up to 7.5 gpm (30 L/min). Notably, this model boasts an extremely low leakage rate of less than one drop per minute or approximately 0.07 cc/min., ensuring efficient performance with minimal fluid loss. Sun Hydraulics has incorporated its floating style construction into this valve to minimize potential internal parts binding that can occur due to excessive installation torque or variations in cavity/cartridge machining. This design enhancement contributes significantly to the overall durability and reliability of the valve under diverse operational conditions. The CXADCAV also supports easy maintenance with available Viton seal kits (990162006), ensuring long-term serviceability and performance retention in demanding hydraulic systems.
The Sun Hydraulics CXADCAV (CXADCAV) is a high-performance check valve designed for hydraulic applications requiring reliable, unidirectional flow control. This model facilitates free flow from the inlet port 2 to the outlet port 1 while effectively blocking flow in the reverse direction. Specifically engineered for scenarios where manifold drillings may be incorrect, these check valves serve as essential circuit savers by accommodating existing circuit layouts without the need for extensive modifications. The CXADCAV operates under a maximum pressure of 5000 psi (350 bar) at both ports and offers a selection of cracking pressures at 4, 30, and 75 psi (0.3, 2, and 5 bar), making it versatile for various hydraulic pressures. It features a T162A cavity and belongs to Series 0, with a fluid capacity of up to 7.5 gpm (30 L/min). Notably, this model boasts an extremely low leakage rate of less than one drop per minute or approximately 0.07 cc/min., ensuring efficient performance with minimal fluid loss. Sun Hydraulics has incorporated its floating style construction into this valve to minimize potential internal parts binding that can occur due to excessive installation torque or variations in cavity/cartridge machining. This design enhancement contributes significantly to the overall durability and reliability of the valve under diverse operational conditions. The CXADCAV also supports easy maintenance with available Viton seal kits (990162006), ensuring long-term serviceability and performance retention in demanding hydraulic systems.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Only available with 4, 30 and 75 psi (0,3, 2 and 5 bar) cracking pressures.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 7.5 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 3/4 in.19,1 mm |
| Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ