SUN HYDRAULICS
CXADCCV
$42.00 USD
- SUN HYDRAULICS
- Material:CXADCCV
- Model:CXAD-CCV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXADCCV (CXADCCV) is a robust and efficient hydraulic check valve designed for high-pressure applications, capable of handling up to 5000 psi (350 bar) at both ports. This model features a free flow from inlet port 2 to outlet port 1, blocking flow in the opposite direction, making it an ideal choice for applications requiring one-way flow. The CXADCCV is specifically engineered to address manifold drilling inaccuracies in existing circuits, serving as a circuit saver by allowing installation without the need for new manifold configurations. With an operational capacity of 7.5 gpm (30 L/min), the CXADCCV supports substantial flow rates while maintaining an extremely low leakage rate of less than one drop per minute (0.07 cc/min). This valve is available with cracking pressures of 4, 30, and 75 psi (0.3, 2, and 5 bar), providing flexibility depending on the specific requirements of the hydraulic system. The construction incorporates Sun\u2019s floating style design which minimizes potential internal part binding due to excessive installation torque or variations in cavity/cartridge machining. This check valve is direct-acting, offering fast response times and high dirt tolerance which enhances its stability and durability under tough operating conditions. For installation, the valve requires a hex size of 3/4 in. (19.1 mm) and an installation torque ranging from 20 - 25 lbf ft (27 - 33 Nm). The model weighs approximately .20 lb (0.10 kg), ensuring that it adds minimal weight to the system setup. Additionally, it uses Viton seals for enhanced performance under various temperature and fluid conditions.
The Sun Hydraulics CXADCCV (CXADCCV) is a robust and efficient hydraulic check valve designed for high-pressure applications, capable of handling up to 5000 psi (350 bar) at both ports. This model features a free flow from inlet port 2 to outlet port 1, blocking flow in the opposite direction, making it an ideal choice for applications requiring one-way flow. The CXADCCV is specifically engineered to address manifold drilling inaccuracies in existing circuits, serving as a circuit saver by allowing installation without the need for new manifold configurations. With an operational capacity of 7.5 gpm (30 L/min), the CXADCCV supports substantial flow rates while maintaining an extremely low leakage rate of less than one drop per minute (0.07 cc/min). This valve is available with cracking pressures of 4, 30, and 75 psi (0.3, 2, and 5 bar), providing flexibility depending on the specific requirements of the hydraulic system. The construction incorporates Sun\u2019s floating style design which minimizes potential internal part binding due to excessive installation torque or variations in cavity/cartridge machining. This check valve is direct-acting, offering fast response times and high dirt tolerance which enhances its stability and durability under tough operating conditions. For installation, the valve requires a hex size of 3/4 in. (19.1 mm) and an installation torque ranging from 20 - 25 lbf ft (27 - 33 Nm). The model weighs approximately .20 lb (0.10 kg), ensuring that it adds minimal weight to the system setup. Additionally, it uses Viton seals for enhanced performance under various temperature and fluid conditions.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Only available with 4, 30 and 75 psi (0,3, 2 and 5 bar) cracking pressures.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 7.5 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 3/4 in.19,1 mm |
| Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ