SUN HYDRAULICS
CXADCEV
$42.00 USD
- SUN HYDRAULICS
- Material:CXADCEV
- Model:CXAD-CEV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXADCEV (CXADCEV) is a precision-engineered check valve designed for hydraulic applications requiring reliable, one-way flow control. This model facilitates free flow from inlet port 2 to outlet port 1 while effectively blocking flow in the reverse direction, making it an essential component for systems where manifold drillings may be incorrect. The CXADCEV check valve is housed in a T162A cavity and belongs to the Series 0, ensuring compatibility with standardized components. With a capacity of 7.5 gpm (30 L/min) and capable of handling maximum operating pressures up to 5000 psi (350 bar), this valve is built to perform under substantial hydraulic pressure. It features exceptionally low leakage rates, with a maximum of less than one drop per minute (0.07 cc/min), highlighting its efficiency and reliability in preventing fluid loss. The valve's construction incorporates Sun's floating style design which minimizes the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining. This model is available with cracking pressures of 4, 30, and 75 psi (0.3, 2, and 5 bar), offering flexibility for different application needs. The physical attributes include a hex size of 3/4 inch (19.1 mm) and an installation torque range between 20 - 25 lbf.ft (27 - 33 Nm). Weighing just .20 lb (0.10 kg), the CXADCEV is lightweight yet robust enough to support high-demand operations within hydraulic systems. For maintenance or repairs, it utilizes a Viton seal kit/cartridge designated by part number: 990162006.
The Sun Hydraulics CXADCEV (CXADCEV) is a precision-engineered check valve designed for hydraulic applications requiring reliable, one-way flow control. This model facilitates free flow from inlet port 2 to outlet port 1 while effectively blocking flow in the reverse direction, making it an essential component for systems where manifold drillings may be incorrect. The CXADCEV check valve is housed in a T162A cavity and belongs to the Series 0, ensuring compatibility with standardized components. With a capacity of 7.5 gpm (30 L/min) and capable of handling maximum operating pressures up to 5000 psi (350 bar), this valve is built to perform under substantial hydraulic pressure. It features exceptionally low leakage rates, with a maximum of less than one drop per minute (0.07 cc/min), highlighting its efficiency and reliability in preventing fluid loss. The valve's construction incorporates Sun's floating style design which minimizes the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining. This model is available with cracking pressures of 4, 30, and 75 psi (0.3, 2, and 5 bar), offering flexibility for different application needs. The physical attributes include a hex size of 3/4 inch (19.1 mm) and an installation torque range between 20 - 25 lbf.ft (27 - 33 Nm). Weighing just .20 lb (0.10 kg), the CXADCEV is lightweight yet robust enough to support high-demand operations within hydraulic systems. For maintenance or repairs, it utilizes a Viton seal kit/cartridge designated by part number: 990162006.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Only available with 4, 30 and 75 psi (0,3, 2 and 5 bar) cracking pressures.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 7.5 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 3/4 in.19,1 mm |
| Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ