SUN HYDRAULICS
CXADXCV
$29.09 USD
- SUN HYDRAULICS
- Material:CXADXCV
- Model:CXAD-XCV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXADXCV (CXADXCV) is designed as a highly efficient and reliable sidet-nose check valve, suitable for various hydraulic applications where free flow from inlet port 2 to outlet port 1 is necessary, while blocking flow in the reverse direction. This model is specifically crafted for scenarios requiring circuit corrections due to incorrect manifold drillings, offering a solution without the need to redesign the entire system. The CXADXCV supports a maximum operating pressure of 5000 psi (350 bar) at both ports and is compatible with three different cracking pressures: 4, 30, and 75 psi (0.3, 2, and 5 bar), making it adaptable to varied operational requirements. The valve features Sun Hydraulics' floating style construction which minimizes the risk of internal parts binding that can occur due to excessive installation torque or discrepancies in cavity/cartridge machining. This design ensures long-term reliability and performance consistency. With an impressive capacity of up to 7.5 gpm (30 L/min), this model can handle significant flow rates while maintaining extremely low leakage levels\u2014less than one drop per minute (0.07 cc/min). The CXADXCV is engineered for ease of installation with a hex size of 3/4 in (19.1 mm) and an installation torque range of 20 - 25 lbf\u00b7ft (27 - 33 Nm). Weighing just .20 lb (0.10 kg), it offers a compact yet robust solution for hydraulic systems needing precise check valve functionality with minimal footprint.
The Sun Hydraulics CXADXCV (CXADXCV) is designed as a highly efficient and reliable sidet-nose check valve, suitable for various hydraulic applications where free flow from inlet port 2 to outlet port 1 is necessary, while blocking flow in the reverse direction. This model is specifically crafted for scenarios requiring circuit corrections due to incorrect manifold drillings, offering a solution without the need to redesign the entire system. The CXADXCV supports a maximum operating pressure of 5000 psi (350 bar) at both ports and is compatible with three different cracking pressures: 4, 30, and 75 psi (0.3, 2, and 5 bar), making it adaptable to varied operational requirements. The valve features Sun Hydraulics' floating style construction which minimizes the risk of internal parts binding that can occur due to excessive installation torque or discrepancies in cavity/cartridge machining. This design ensures long-term reliability and performance consistency. With an impressive capacity of up to 7.5 gpm (30 L/min), this model can handle significant flow rates while maintaining extremely low leakage levels\u2014less than one drop per minute (0.07 cc/min). The CXADXCV is engineered for ease of installation with a hex size of 3/4 in (19.1 mm) and an installation torque range of 20 - 25 lbf\u00b7ft (27 - 33 Nm). Weighing just .20 lb (0.10 kg), it offers a compact yet robust solution for hydraulic systems needing precise check valve functionality with minimal footprint.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Only available with 4, 30 and 75 psi (0,3, 2 and 5 bar) cracking pressures.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 7.5 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 3/4 in.19,1 mm |
| Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ