SUN HYDRAULICS
CXADXEV
$29.09 USD
- SUN HYDRAULICS
- Material:CXADXEV
- Model:CXAD-XEV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXADXEV (CXADXEV) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model features a side-to-nose configuration, allowing free flow from inlet port 2 to outlet port 1 while blocking the reverse flow, making it an essential component for systems where manifold drilling inaccuracies occur. The CXADXEV operates under a maximum pressure of 5000 psi (350 bar) at both ports and is suitable for systems with flow capacities up to 7.5 gpm (30 L/min). Engineered with Sun's floating style construction, the CXADXEV minimizes internal parts binding, ensuring consistent performance even under variable installation torques or cavity/cartridge machining discrepancies. It offers exceptionally low leakage rates, with less than one drop per minute (0.07 cc/min), contributing to enhanced system efficiency and reduced fluid loss. This model is available in three cracking pressures: 4 psi (0.3 bar), 30 psi (2 bar), and 75 psi (5 bar), providing versatility for different application requirements. The valve's compact design includes a hex size of 3/4 in. (19.1 mm) and weighs just 0.20 lb (0.10 kg), facilitating easy installation with a recommended torque of 20 - 25 lbf\u00b7ft (27 - 33 Nm). The use of Viton seals ensures compatibility with a wide range of hydraulic fluids and environmental conditions, enhancing durability and operational lifespan.
The Sun Hydraulics CXADXEV (CXADXEV) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model features a side-to-nose configuration, allowing free flow from inlet port 2 to outlet port 1 while blocking the reverse flow, making it an essential component for systems where manifold drilling inaccuracies occur. The CXADXEV operates under a maximum pressure of 5000 psi (350 bar) at both ports and is suitable for systems with flow capacities up to 7.5 gpm (30 L/min). Engineered with Sun's floating style construction, the CXADXEV minimizes internal parts binding, ensuring consistent performance even under variable installation torques or cavity/cartridge machining discrepancies. It offers exceptionally low leakage rates, with less than one drop per minute (0.07 cc/min), contributing to enhanced system efficiency and reduced fluid loss. This model is available in three cracking pressures: 4 psi (0.3 bar), 30 psi (2 bar), and 75 psi (5 bar), providing versatility for different application requirements. The valve's compact design includes a hex size of 3/4 in. (19.1 mm) and weighs just 0.20 lb (0.10 kg), facilitating easy installation with a recommended torque of 20 - 25 lbf\u00b7ft (27 - 33 Nm). The use of Viton seals ensures compatibility with a wide range of hydraulic fluids and environmental conditions, enhancing durability and operational lifespan.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Only available with 4, 30 and 75 psi (0,3, 2 and 5 bar) cracking pressures.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 7.5 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 3/4 in.19,1 mm |
| Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ