SUN HYDRAULICS
CXCBXAV
$60.76 USD
- SUN HYDRAULICS
- Material:CXCBXAV
- Model:CXCB-XAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXCBXAV (CXCBXAV) is a two-port, sidetonose freeflow check valve designed for hydraulic systems. It facilitates unidirectional flow from inlet port 2 to outlet port 1 while blocking flow in the reverse direction, making it an essential component for systems requiring one-way flow. This model features a Delrin seat that is particularly suited for medium pressure systems with dirty conditions but not high flow rates or temperatures. The CXCBXAV valve is compatible with T13A cavity specifications and can handle a maximum operating pressure of 3000 psi (210 bar) and a flow capacity of up to 15 gpm (60 L/min). The valve's design includes Sun's floating style construction which helps prevent internal parts from binding due to excessive installation torque or cavity/cartridge machining variations. This model promises minimal leakage, maintaining less than 1 drop per minute (0.07 cc/min), ensuring efficiency and reducing fluid loss in critical applications. It has specific installation requirements with a valve hex size of 7/8 in. (22.2 mm) and an installation torque range of 30-35 lbf.ft (41-47 Nm). Weighing just 0.20 lb (0.10 kg), the CXCBXAV is lightweight yet robust, suitable for retrofitting into existing circuits where manifold drillings might be incorrect, thus acting as a circuit saver by accommodating installation variances without compromising on performance or reliability.
The Sun Hydraulics CXCBXAV (CXCBXAV) is a two-port, sidetonose freeflow check valve designed for hydraulic systems. It facilitates unidirectional flow from inlet port 2 to outlet port 1 while blocking flow in the reverse direction, making it an essential component for systems requiring one-way flow. This model features a Delrin seat that is particularly suited for medium pressure systems with dirty conditions but not high flow rates or temperatures. The CXCBXAV valve is compatible with T13A cavity specifications and can handle a maximum operating pressure of 3000 psi (210 bar) and a flow capacity of up to 15 gpm (60 L/min). The valve's design includes Sun's floating style construction which helps prevent internal parts from binding due to excessive installation torque or cavity/cartridge machining variations. This model promises minimal leakage, maintaining less than 1 drop per minute (0.07 cc/min), ensuring efficiency and reducing fluid loss in critical applications. It has specific installation requirements with a valve hex size of 7/8 in. (22.2 mm) and an installation torque range of 30-35 lbf.ft (41-47 Nm). Weighing just 0.20 lb (0.10 kg), the CXCBXAV is lightweight yet robust, suitable for retrofitting into existing circuits where manifold drillings might be incorrect, thus acting as a circuit saver by accommodating installation variances without compromising on performance or reliability.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- The Delrin seat is suitable for dirty, medium pressure systems that are not subjected to high flows or temperatures.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 15 gpm60 L/min. |
| Maximum Operating Pressure | 3000 psi210 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ