SUN HYDRAULICS
CXCBXFV
$59.76 USD
- SUN HYDRAULICS
- Material:CXCBXFV
- Model:CXCB-XFV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXCBXFV (CXCBXFV) is a high-performance check valve designed for hydraulic systems requiring reliable, one-way flow control. This model features a free flow from the inlet port 2 to the outlet port 1, effectively blocking flow in the reverse direction, making it an essential component for systems where backflow prevention is critical. The valve's construction includes a Delrin seat, which provides durability and suitability for medium pressure systems that encounter moderate levels of dirt and do not operate under high flow or temperature conditions. With a T13A cavity and Series 1 designation, the CXCBXFV has a flow capacity of up to 15 gallons per minute (60 liters per minute) and can withstand a maximum operating pressure of 3000 psi (210 bar). It is particularly noted for its extremely low leakage rate, with maximum valve leakage specified at less than one drop per minute (0.07 cc/min), ensuring efficient system performance with minimal fluid loss. This model also incorporates Sun\u2019s floating style construction which minimizes potential internal part binding due to excessive installation torque or variations in cavity/cartridge machining. These features make the CXCBXFV ideal as a circuit saver in existing systems where manifold drillings may be incorrect. The valve's hex size is 7/8 inches (22.2 mm), and it requires an installation torque between 30 - 35 lbf ft (41 - 47 Nm). Weighing just 0.20 lb (0.10 kg), this check valve integrates seamlessly into various hydraulic setups without adding significant weight or complexity.
The Sun Hydraulics CXCBXFV (CXCBXFV) is a high-performance check valve designed for hydraulic systems requiring reliable, one-way flow control. This model features a free flow from the inlet port 2 to the outlet port 1, effectively blocking flow in the reverse direction, making it an essential component for systems where backflow prevention is critical. The valve's construction includes a Delrin seat, which provides durability and suitability for medium pressure systems that encounter moderate levels of dirt and do not operate under high flow or temperature conditions. With a T13A cavity and Series 1 designation, the CXCBXFV has a flow capacity of up to 15 gallons per minute (60 liters per minute) and can withstand a maximum operating pressure of 3000 psi (210 bar). It is particularly noted for its extremely low leakage rate, with maximum valve leakage specified at less than one drop per minute (0.07 cc/min), ensuring efficient system performance with minimal fluid loss. This model also incorporates Sun\u2019s floating style construction which minimizes potential internal part binding due to excessive installation torque or variations in cavity/cartridge machining. These features make the CXCBXFV ideal as a circuit saver in existing systems where manifold drillings may be incorrect. The valve's hex size is 7/8 inches (22.2 mm), and it requires an installation torque between 30 - 35 lbf ft (41 - 47 Nm). Weighing just 0.20 lb (0.10 kg), this check valve integrates seamlessly into various hydraulic setups without adding significant weight or complexity.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- The Delrin seat is suitable for dirty, medium pressure systems that are not subjected to high flows or temperatures.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 15 gpm60 L/min. |
| Maximum Operating Pressure | 3000 psi210 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ