SUN HYDRAULICS
CXCELBV
$52.82 USD
- SUN HYDRAULICS
- Material:CXCELBV
- Model:CXCE-LBV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXCELBV (CXCELBV) is a direct-acting, side-to-nose cheater check valve designed for robust performance in hydraulic systems. This valve functions as a standard 2-port check valve in a 3-port cavity configuration, with the third port blocked off, making it ideal for applications where a check valve is needed in an existing three-port cavity. The CXCELBV offers exceptional reliability with extremely low leakage rates, less than 1 drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. Rated to handle pressures up to 5000 psi (350 bar) at ports 1 and 2, this valve is suited for high-pressure environments. It features Sun Hydraulics' floating style construction which minimizes the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining, thus enhancing its operational longevity and performance consistency. The valve's compact design includes a T11A cavity and adheres to the Series 1 specification. It has a flow capacity of up to 15 gpm (60 L/min) and can be installed with a hex size of 7/8 in. (22.2 mm), requiring an installation torque between 30 - 35 lbf ft (41 - 47 Nm). Weighing just .20 lb (0.10 kg), it offers a lightweight solution without compromising on strength or efficiency. The CXCELBV also supports Viton seals for enhanced chemical resistance, suitable for corrosive environments when specified with model code suffix AP or LH.
The Sun Hydraulics CXCELBV (CXCELBV) is a direct-acting, side-to-nose cheater check valve designed for robust performance in hydraulic systems. This valve functions as a standard 2-port check valve in a 3-port cavity configuration, with the third port blocked off, making it ideal for applications where a check valve is needed in an existing three-port cavity. The CXCELBV offers exceptional reliability with extremely low leakage rates, less than 1 drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. Rated to handle pressures up to 5000 psi (350 bar) at ports 1 and 2, this valve is suited for high-pressure environments. It features Sun Hydraulics' floating style construction which minimizes the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining, thus enhancing its operational longevity and performance consistency. The valve's compact design includes a T11A cavity and adheres to the Series 1 specification. It has a flow capacity of up to 15 gpm (60 L/min) and can be installed with a hex size of 7/8 in. (22.2 mm), requiring an installation torque between 30 - 35 lbf ft (41 - 47 Nm). Weighing just .20 lb (0.10 kg), it offers a lightweight solution without compromising on strength or efficiency. The CXCELBV also supports Viton seals for enhanced chemical resistance, suitable for corrosive environments when specified with model code suffix AP or LH.
Free-flow, side-to-nose cheater check valves function as a standard 2-port check valve in a 3-port cavity with port 3 of the cartridge blocked off. These valves are useful in circuits where a check valve is required in an existing three port cavity.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 15 gpm60 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ