SUN HYDRAULICS
CXDAKFV
$48.15 USD
- SUN HYDRAULICS
- Material:CXDAKFV
- Model:CXDA-KFV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXDAKFV (CXDAKFV) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model is part of the T13A cavity series and is engineered to handle a maximum flow capacity of 20 gpm (80 L/min) with an operational pressure up to 5000 psi (350 bar). The valve features a robust design with extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), ensuring efficient and precise fluid control in critical systems. Constructed with EPDM seals, the CXDAKFV is specifically suited for use with phosphate ester fluids, while its compatibility with petroleum-based fluids, greases, and lubricants should be avoided to prevent seal damage. The valve's corrosion-resistant options (identified by model code suffixes AP or LH) make it ideal for use in corrosive environments. Additionally, the Sun floating style construction incorporated into this model minimizes internal parts binding which could arise from excessive installation torque or variations in cavity/cartridge machining. Key technical specifications include a hex size of 7/8 in (22.2 mm) and an installation torque requirement between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). The valve itself weighs approximately 0.20 lb (0.10 kg), making it lightweight yet durable for various industrial applications. This product exemplifies Sun Hydraulics' commitment to quality and precision in developing hydraulic components that meet stringent performance criteria across diverse operating conditions.
The Sun Hydraulics CXDAKFV (CXDAKFV) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model is part of the T13A cavity series and is engineered to handle a maximum flow capacity of 20 gpm (80 L/min) with an operational pressure up to 5000 psi (350 bar). The valve features a robust design with extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), ensuring efficient and precise fluid control in critical systems. Constructed with EPDM seals, the CXDAKFV is specifically suited for use with phosphate ester fluids, while its compatibility with petroleum-based fluids, greases, and lubricants should be avoided to prevent seal damage. The valve's corrosion-resistant options (identified by model code suffixes AP or LH) make it ideal for use in corrosive environments. Additionally, the Sun floating style construction incorporated into this model minimizes internal parts binding which could arise from excessive installation torque or variations in cavity/cartridge machining. Key technical specifications include a hex size of 7/8 in (22.2 mm) and an installation torque requirement between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). The valve itself weighs approximately 0.20 lb (0.10 kg), making it lightweight yet durable for various industrial applications. This product exemplifies Sun Hydraulics' commitment to quality and precision in developing hydraulic components that meet stringent performance criteria across diverse operating conditions.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 20 gpm80 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ