SUN HYDRAULICS
CXDALAV
$40.21 USD
- SUN HYDRAULICS
- Material:CXDALAV
- Model:CXDA-LAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXDALAV (CXDALAV) is a high-performance check valve designed for hydraulic systems requiring reliable, one-way flow control. This model is part of the T13A cavity series and can handle a flow capacity up to 20 gpm (80 L/min) with a maximum operating pressure of 5000 psi (350 bar). The CXDALAV features extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), ensuring efficiency and minimal fluid loss in critical applications. Constructed to fit within a compact frame size, the CXDALAV utilizes Sun's floating style construction. This design minimizes potential internal parts binding that could result from excessive installation torque or variations in cavity/cartridge machining, enhancing durability and valve performance under varied conditions. The valve is specifically configured with EPDM seals suitable for use with phosphate ester fluids; however, these seals must not be exposed to petroleum-based fluids as they can cause damage. The check valve's robust design includes corrosion-resistant options marked by the AP or LH suffix in the model code for applications in corrosive environments. With its straightforward two-port configuration, the CXDALAV ensures ease of installation with a hex size of 7/8 in (22.2 mm) and an installation torque requirement between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). Weighing just 0.20 lb (0.10 kg), this valve combines lightweight construction with tough performance standards suitable for various hydraulic applications where space and reliability are critical.
The Sun Hydraulics CXDALAV (CXDALAV) is a high-performance check valve designed for hydraulic systems requiring reliable, one-way flow control. This model is part of the T13A cavity series and can handle a flow capacity up to 20 gpm (80 L/min) with a maximum operating pressure of 5000 psi (350 bar). The CXDALAV features extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), ensuring efficiency and minimal fluid loss in critical applications. Constructed to fit within a compact frame size, the CXDALAV utilizes Sun's floating style construction. This design minimizes potential internal parts binding that could result from excessive installation torque or variations in cavity/cartridge machining, enhancing durability and valve performance under varied conditions. The valve is specifically configured with EPDM seals suitable for use with phosphate ester fluids; however, these seals must not be exposed to petroleum-based fluids as they can cause damage. The check valve's robust design includes corrosion-resistant options marked by the AP or LH suffix in the model code for applications in corrosive environments. With its straightforward two-port configuration, the CXDALAV ensures ease of installation with a hex size of 7/8 in (22.2 mm) and an installation torque requirement between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). Weighing just 0.20 lb (0.10 kg), this valve combines lightweight construction with tough performance standards suitable for various hydraulic applications where space and reliability are critical.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 20 gpm80 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ