SUN HYDRAULICS
CXDALCV
$40.21 USD
- SUN HYDRAULICS
- Material:CXDALCV
- Model:CXDA-LCV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXDALCV (CXDALCV) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model features a nosetoside check configuration, which allows free flow from the inlet port 1 to the outlet port 2 while blocking flow in the reverse direction. The CXDALCV is engineered to fit into a T13A cavity and is part of Sun Hydraulics' Series 1. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of up to 20 gpm (80 L/min), this valve is suited for various demanding applications. It demonstrates exceptional performance with an extremely low maximum leakage rate of less than 1 drop per minute (0.07 cc/min), ensuring efficiency and minimal fluid loss. The valve's construction includes EPDM seals specifically for use with phosphate ester fluids; however, these seals are not compatible with petroleum-based fluids, greases, and lubricants as they can cause damage. Additionally, the CXDALCV incorporates Sun\u2019s floating style construction which minimizes internal parts binding that could occur due to excessive installation torque or variations in cavity/cartridge machining. The model weighs approximately 0.20 lb (0.10 kg) and requires an installation torque between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). Its hex size for installation measures 7/8 in. (22.2 mm). For maintenance or repair, Viton seal kits are available under part number: 990010006. Overall, the Sun Hydraulics CXDALCV check valve offers robust performance and reliability for hydraulic systems requiring precise fluid control under high-pressure conditions.
The Sun Hydraulics CXDALCV (CXDALCV) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model features a nosetoside check configuration, which allows free flow from the inlet port 1 to the outlet port 2 while blocking flow in the reverse direction. The CXDALCV is engineered to fit into a T13A cavity and is part of Sun Hydraulics' Series 1. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of up to 20 gpm (80 L/min), this valve is suited for various demanding applications. It demonstrates exceptional performance with an extremely low maximum leakage rate of less than 1 drop per minute (0.07 cc/min), ensuring efficiency and minimal fluid loss. The valve's construction includes EPDM seals specifically for use with phosphate ester fluids; however, these seals are not compatible with petroleum-based fluids, greases, and lubricants as they can cause damage. Additionally, the CXDALCV incorporates Sun\u2019s floating style construction which minimizes internal parts binding that could occur due to excessive installation torque or variations in cavity/cartridge machining. The model weighs approximately 0.20 lb (0.10 kg) and requires an installation torque between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). Its hex size for installation measures 7/8 in. (22.2 mm). For maintenance or repair, Viton seal kits are available under part number: 990010006. Overall, the Sun Hydraulics CXDALCV check valve offers robust performance and reliability for hydraulic systems requiring precise fluid control under high-pressure conditions.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 20 gpm80 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ