SUN HYDRAULICS
CXDBXEN
$34.85 USD
- SUN HYDRAULICS
- Material:CXDBXEN
- Model:CXDB-XEN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXDBXEN (CXDBXEN) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model features a free flow from the inlet port 1 to the outlet port 2, while effectively blocking flow in the reverse direction, making it an ideal choice for systems where backflow prevention is critical. The CXDBXEN is characterized by its extremely low leakage rate, which is less than one drop per minute (0.07 cc/min), ensuring efficiency and minimal fluid loss in operations. Rated for pressures up to 5000 psi (350 bar) at both ports, this valve can handle demanding applications across various hydraulic systems. It supports a flow capacity of up to 20 gpm (80 L/min), catering to substantial fluid transfer requirements with ease. The valve incorporates Sun\u2019s floating style construction which minimizes the risk of internal parts binding\u2014a common issue that can arise from over-torquing during installation or due to variations in cavity/cartridge machining. For installation, the CXDBXEN requires a hex size of 7/8 in. (22.2 mm) and an installation torque between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). It utilizes Viton seals for enhanced durability and chemical resistance under various operating conditions. This model fits into a T10A cavity and belongs to Series 1, reflecting its standardization and compatibility within Sun Hydraulics\u2019 product range. Its robust design and reliable performance make the CXDBXEN an essential component for optimizing hydraulic circuit functionality while maintaining system integrity and safety.
The Sun Hydraulics CXDBXEN (CXDBXEN) is a high-performance check valve designed for hydraulic applications requiring reliable, one-way flow control. This model features a free flow from the inlet port 1 to the outlet port 2, while effectively blocking flow in the reverse direction, making it an ideal choice for systems where backflow prevention is critical. The CXDBXEN is characterized by its extremely low leakage rate, which is less than one drop per minute (0.07 cc/min), ensuring efficiency and minimal fluid loss in operations. Rated for pressures up to 5000 psi (350 bar) at both ports, this valve can handle demanding applications across various hydraulic systems. It supports a flow capacity of up to 20 gpm (80 L/min), catering to substantial fluid transfer requirements with ease. The valve incorporates Sun\u2019s floating style construction which minimizes the risk of internal parts binding\u2014a common issue that can arise from over-torquing during installation or due to variations in cavity/cartridge machining. For installation, the CXDBXEN requires a hex size of 7/8 in. (22.2 mm) and an installation torque between 30 \u2013 35 lbf\u00b7ft (41 \u2013 47 Nm). It utilizes Viton seals for enhanced durability and chemical resistance under various operating conditions. This model fits into a T10A cavity and belongs to Series 1, reflecting its standardization and compatibility within Sun Hydraulics\u2019 product range. Its robust design and reliable performance make the CXDBXEN an essential component for optimizing hydraulic circuit functionality while maintaining system integrity and safety.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-10A |
| Series | 1 |
| Capacity | 20 gpm80 L/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ