SUN HYDRAULICS
CXEDXBN
$39.91 USD
- SUN HYDRAULICS
- Material:CXEDXBN
- Model:CXED-XBN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXEDXBN (CXEDXBN) is a highly efficient and reliable hydraulic check valve designed for on-off circuit control, allowing free flow from inlet port 2 to outlet port 1 while blocking flow in the opposite direction. This two-port check valve is compatible with T5A cavity specifications and belongs to the Series 2 lineup. It is particularly useful as a circuit saver in systems where manifold drillings may be incorrect, offering an alternative path for hydraulic fluid. The CXEDXBN model supports a maximum operating pressure of 5000 psi (350 bar) at both ports and has a flow capacity of up to 30 gallons per minute (120 liters per minute). It features an exceptionally low leakage rate, with maximum leakage less than one drop per minute (0.07 cc/min), ensuring minimal fluid loss and enhanced system efficiency. The valve incorporates Sun's floating style construction which helps prevent internal parts binding that can occur due to excessive installation torque or variations in cavity/cartridge machining. For installation, this model requires a hex size of 1-1/8 inches (28.6 mm) and an installation torque between 45 - 50 lbf ft (61 - 68 Nm). It weighs approximately 0.40 lb (0.20 kg), making it lightweight yet robust enough for demanding applications. The CXEDXBN uses Viton seals for high thermal stability and chemical resistance, ensuring durability and long service life under various operating conditions.
The Sun Hydraulics CXEDXBN (CXEDXBN) is a highly efficient and reliable hydraulic check valve designed for on-off circuit control, allowing free flow from inlet port 2 to outlet port 1 while blocking flow in the opposite direction. This two-port check valve is compatible with T5A cavity specifications and belongs to the Series 2 lineup. It is particularly useful as a circuit saver in systems where manifold drillings may be incorrect, offering an alternative path for hydraulic fluid. The CXEDXBN model supports a maximum operating pressure of 5000 psi (350 bar) at both ports and has a flow capacity of up to 30 gallons per minute (120 liters per minute). It features an exceptionally low leakage rate, with maximum leakage less than one drop per minute (0.07 cc/min), ensuring minimal fluid loss and enhanced system efficiency. The valve incorporates Sun's floating style construction which helps prevent internal parts binding that can occur due to excessive installation torque or variations in cavity/cartridge machining. For installation, this model requires a hex size of 1-1/8 inches (28.6 mm) and an installation torque between 45 - 50 lbf ft (61 - 68 Nm). It weighs approximately 0.40 lb (0.20 kg), making it lightweight yet robust enough for demanding applications. The CXEDXBN uses Viton seals for high thermal stability and chemical resistance, ensuring durability and long service life under various operating conditions.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 30 gpm120 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Model Weight | .40 lb0,20 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ