SUN HYDRAULICS
CXEDXDN
$39.91 USD
- SUN HYDRAULICS
- Material:CXEDXDN
- Model:CXED-XDN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXEDXDN (CXEDXDN) is a high-performance check valve designed for hydraulic applications, ensuring efficient flow control and system protection. The valve allows free flow from its inlet port 2 to the outlet port 1 while blocking flow in the reverse direction. This feature makes it an essential component in various hydraulic circuits, particularly where incorrect manifold drillings have occurred, as it acts as a circuit saver. Constructed with Sun Hydraulics' floating style, the CXEDXDN minimizes potential internal parts binding caused by excessive installation torque or variations in cavity/cartridge machining. This design enhances durability and reliability even under high pressure conditions up to 5000 psi (350 bar) at both ports. The valve's maximum capacity is rated at 30 gpm (120 L/min), suitable for a range of medium to high-flow applications. The CXEDXDN exhibits exceptionally low leakage rates, with a maximum of less than one drop per minute (0.07 cc/min), ensuring minimal fluid loss and efficient operation. It is designed to fit into a T5A cavity and belongs to Series 2 of Sun Hydraulics' product line. For installation, the valve requires a hex size of 1 1/8 in. (28.6 mm) and an installation torque between 45 - 50 lbf\u00b7ft (61 - 68 Nm). The overall weight of the model is modest at approximately 0.40 lb (0.20 kg). Additionally, this model uses Viton seals for enhanced chemical resistance and temperature tolerance, further affirming its suitability for challenging industrial environments where hydraulic systems must perform optimally without frequent maintenance or part replacement.
The Sun Hydraulics CXEDXDN (CXEDXDN) is a high-performance check valve designed for hydraulic applications, ensuring efficient flow control and system protection. The valve allows free flow from its inlet port 2 to the outlet port 1 while blocking flow in the reverse direction. This feature makes it an essential component in various hydraulic circuits, particularly where incorrect manifold drillings have occurred, as it acts as a circuit saver. Constructed with Sun Hydraulics' floating style, the CXEDXDN minimizes potential internal parts binding caused by excessive installation torque or variations in cavity/cartridge machining. This design enhances durability and reliability even under high pressure conditions up to 5000 psi (350 bar) at both ports. The valve's maximum capacity is rated at 30 gpm (120 L/min), suitable for a range of medium to high-flow applications. The CXEDXDN exhibits exceptionally low leakage rates, with a maximum of less than one drop per minute (0.07 cc/min), ensuring minimal fluid loss and efficient operation. It is designed to fit into a T5A cavity and belongs to Series 2 of Sun Hydraulics' product line. For installation, the valve requires a hex size of 1 1/8 in. (28.6 mm) and an installation torque between 45 - 50 lbf\u00b7ft (61 - 68 Nm). The overall weight of the model is modest at approximately 0.40 lb (0.20 kg). Additionally, this model uses Viton seals for enhanced chemical resistance and temperature tolerance, further affirming its suitability for challenging industrial environments where hydraulic systems must perform optimally without frequent maintenance or part replacement.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 30 gpm120 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Model Weight | .40 lb0,20 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ