SUN HYDRAULICS
CXEDXZV
$48.35 USD
- SUN HYDRAULICS
- Material:CXEDXZV
- Model:CXED-XZV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXEDXZV (CXEDXZV) is a high-performance hydraulic check valve designed for efficient flow control in hydraulic systems. This model, featuring a sidetonose check configuration, allows free flow from the inlet port 2 to the outlet port 1 while blocking flow in the reverse direction, making it an ideal solution for applications requiring one-way flow. The valve is particularly useful as a circuit saver in systems where manifold drillings are incorrect, offering a practical remedy without the need for extensive system modifications. This two-port check valve is built to fit a T5A cavity and belongs to Series 2. It has a maximum flow capacity of 30 gpm (120 L/min) and can withstand operating pressures up to 5000 psi (350 bar). Notably, the CXEDXZV exhibits exceptionally low leakage rates, less than one drop per minute (0.07 cc/min), ensuring minimal fluid loss and enhanced system efficiency. Constructed using Sun\u2019s floating style design, the CXEDXZV minimizes potential internal part binding that could result from excessive installation torque or variations in cavity/cartridge machining. This feature enhances the durability and reliability of the valve under various operational conditions. The valve requires an installation torque of between 45 - 50 lbf\u00b7ft (61 - 68 Nm) and has a hex size of 1-1/8 inches (28.6 mm). Weighing just 0.40 lb (0.20 kg), it is compact yet robust enough to handle demanding applications. The seal kit for this model uses Viton components, ensuring compatibility with a wide range of fluids and temperature ranges.
The Sun Hydraulics CXEDXZV (CXEDXZV) is a high-performance hydraulic check valve designed for efficient flow control in hydraulic systems. This model, featuring a sidetonose check configuration, allows free flow from the inlet port 2 to the outlet port 1 while blocking flow in the reverse direction, making it an ideal solution for applications requiring one-way flow. The valve is particularly useful as a circuit saver in systems where manifold drillings are incorrect, offering a practical remedy without the need for extensive system modifications. This two-port check valve is built to fit a T5A cavity and belongs to Series 2. It has a maximum flow capacity of 30 gpm (120 L/min) and can withstand operating pressures up to 5000 psi (350 bar). Notably, the CXEDXZV exhibits exceptionally low leakage rates, less than one drop per minute (0.07 cc/min), ensuring minimal fluid loss and enhanced system efficiency. Constructed using Sun\u2019s floating style design, the CXEDXZV minimizes potential internal part binding that could result from excessive installation torque or variations in cavity/cartridge machining. This feature enhances the durability and reliability of the valve under various operational conditions. The valve requires an installation torque of between 45 - 50 lbf\u00b7ft (61 - 68 Nm) and has a hex size of 1-1/8 inches (28.6 mm). Weighing just 0.40 lb (0.20 kg), it is compact yet robust enough to handle demanding applications. The seal kit for this model uses Viton components, ensuring compatibility with a wide range of fluids and temperature ranges.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-5A |
| Series | 2 |
| Capacity | 30 gpm120 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Model Weight | .40 lb0,20 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ