SUN HYDRAULICS
CXGDLCN
$88.86 USD
- SUN HYDRAULICS
- Material:CXGDLCN
- Model:CXGD-LCN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXGDLCN (CXGDLCN) is a high-performance check valve designed for hydraulic applications requiring reliable one-way flow and minimal leakage. This model operates under a freeflow, side-to-nose configuration, allowing fluid to move freely from inlet port 2 to outlet port 1 while blocking reverse flow. Specifically engineered for systems where manifold drillings may be incorrect, these valves serve as crucial circuit components in correcting these errors without the need for extensive rework. With a maximum operating pressure of 5000 psi (350 bar) and a flow capacity of up to 60 gpm (240 L/min), the CXGDLCN is built to handle demanding conditions. It features extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. The valve's construction incorporates Sun's floating style design which helps minimize internal part binding due to installation torque or machining variations of the cavity/cartridge. This model is compatible with systems using phosphate ester fluids, thanks to its EPDM seals; however, it should not be exposed to petroleum-based fluids which could damage the seals. The valve's robust design includes a hex size of 1-1/4 in. (31.8 mm) and requires an installation torque between 150 - 160 lbf.ft (203 - 217 Nm). Weighing only 1.60 lbs (0.70 kg), the CXGDLCN combines lightweight with durable performance, making it an optimal choice for various hydraulic applications needing dependable check valves with superior sealing capabilities.
The Sun Hydraulics CXGDLCN (CXGDLCN) is a high-performance check valve designed for hydraulic applications requiring reliable one-way flow and minimal leakage. This model operates under a freeflow, side-to-nose configuration, allowing fluid to move freely from inlet port 2 to outlet port 1 while blocking reverse flow. Specifically engineered for systems where manifold drillings may be incorrect, these valves serve as crucial circuit components in correcting these errors without the need for extensive rework. With a maximum operating pressure of 5000 psi (350 bar) and a flow capacity of up to 60 gpm (240 L/min), the CXGDLCN is built to handle demanding conditions. It features extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. The valve's construction incorporates Sun's floating style design which helps minimize internal part binding due to installation torque or machining variations of the cavity/cartridge. This model is compatible with systems using phosphate ester fluids, thanks to its EPDM seals; however, it should not be exposed to petroleum-based fluids which could damage the seals. The valve's robust design includes a hex size of 1-1/4 in. (31.8 mm) and requires an installation torque between 150 - 160 lbf.ft (203 - 217 Nm). Weighing only 1.60 lbs (0.70 kg), the CXGDLCN combines lightweight with durable performance, making it an optimal choice for various hydraulic applications needing dependable check valves with superior sealing capabilities.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.60 lb0,70 kg |
| Seal kit - Cartridge | Viton: 990-016-006 |
Show FAQ