SUN HYDRAULICS
CXGDLEN
$88.86 USD
- SUN HYDRAULICS
- Material:CXGDLEN
- Model:CXGD-LEN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXGDLEN (CXGDLEN) is a high-performance check valve designed for hydraulic applications requiring reliable one-way flow and minimal leakage. This model, part of the T-16A cavity series 3, facilitates free flow from inlet port 2 to outlet port 1 while blocking reverse flow, ensuring efficient operation in various hydraulic systems. The CXGDLEN is specifically engineered to correct manifold drilling inaccuracies in existing circuits, acting as a circuit saver with its side-to-nose configuration. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of up to 60 gpm (240 L/min), this valve is well-suited for heavy-duty applications. It features extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), which stands out in maintaining system integrity and reducing fluid loss. The valve's construction includes Sun\u2019s floating style design which minimizes internal parts binding that could arise from excessive installation torque or variations in cavity/cartridge machining. The CXGDLEN is compatible with EPDM seals for systems utilizing phosphate ester fluids; however, it requires caution as exposure to petroleum-based fluids can damage these seals. Installation specifications include a hex size of 1-1/4 inches (31.8 mm) and an installation torque range of 150 - 160 lbf.ft (203 - 217 Nm). Weighing at approximately 1.60 lbs (0.70 kg), it integrates seamlessly into system setups without adding significant weight or complexity. This model is particularly valuable in applications where incorrect manifold drillings have previously limited system efficiency or where robust, low-leakage performance is critical under high pressure conditions.
The Sun Hydraulics CXGDLEN (CXGDLEN) is a high-performance check valve designed for hydraulic applications requiring reliable one-way flow and minimal leakage. This model, part of the T-16A cavity series 3, facilitates free flow from inlet port 2 to outlet port 1 while blocking reverse flow, ensuring efficient operation in various hydraulic systems. The CXGDLEN is specifically engineered to correct manifold drilling inaccuracies in existing circuits, acting as a circuit saver with its side-to-nose configuration. With a maximum operating pressure of 5000 psi (350 bar) and a capacity of up to 60 gpm (240 L/min), this valve is well-suited for heavy-duty applications. It features extremely low leakage rates, not exceeding 1 drop per minute (0.07 cc/min), which stands out in maintaining system integrity and reducing fluid loss. The valve's construction includes Sun\u2019s floating style design which minimizes internal parts binding that could arise from excessive installation torque or variations in cavity/cartridge machining. The CXGDLEN is compatible with EPDM seals for systems utilizing phosphate ester fluids; however, it requires caution as exposure to petroleum-based fluids can damage these seals. Installation specifications include a hex size of 1-1/4 inches (31.8 mm) and an installation torque range of 150 - 160 lbf.ft (203 - 217 Nm). Weighing at approximately 1.60 lbs (0.70 kg), it integrates seamlessly into system setups without adding significant weight or complexity. This model is particularly valuable in applications where incorrect manifold drillings have previously limited system efficiency or where robust, low-leakage performance is critical under high pressure conditions.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.60 lb0,70 kg |
| Seal kit - Cartridge | Viton: 990-016-006 |
Show FAQ