SUN HYDRAULICS
CXGDXDN
$82.90 USD
- SUN HYDRAULICS
- Material:CXGDXDN
- Model:CXGD-XDN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXGDXDN (CXGDXDN) is a high-performance check valve designed for hydraulic applications requiring reliable one-way flow and minimal leakage. This model is specifically crafted with a side-to-nose free flow from port 2 to port 1 configuration, which typically sees about 30% less capacity compared to the nose-to-side models but is essential in correcting manifold drilling inaccuracies in existing systems. The CXGDXDN valve operates effectively under a maximum pressure of 5000 psi (350 bar) at both ports and supports a flow capacity up to 60 gpm (240 L/min). Key features of this valve include an extremely low maximum leakage rate of less than one drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. It is equipped with EPDM seals, making it suitable for systems using phosphate ester fluids while avoiding exposure to petroleum-based substances which could degrade the seal quality. Additionally, the valve benefits from Sun Hydraulics' floating style construction which helps prevent internal parts from binding due to variations in installation torque or cartridge machining. The CXGDXDN model has a hex size of 1-1/4 inches (31.8 mm) and requires an installation torque between 150-160 lbf-ft (203-217 Nm). It weighs approximately 1.60 lbs (0.70 kg), making it robust yet manageable for integration into various hydraulic circuits. Ideal for applications where precise fluid control and reliability are paramount, this check valve enhances system efficiency while providing a solution for circuit correction needs without extensive modifications.
The Sun Hydraulics CXGDXDN (CXGDXDN) is a high-performance check valve designed for hydraulic applications requiring reliable one-way flow and minimal leakage. This model is specifically crafted with a side-to-nose free flow from port 2 to port 1 configuration, which typically sees about 30% less capacity compared to the nose-to-side models but is essential in correcting manifold drilling inaccuracies in existing systems. The CXGDXDN valve operates effectively under a maximum pressure of 5000 psi (350 bar) at both ports and supports a flow capacity up to 60 gpm (240 L/min). Key features of this valve include an extremely low maximum leakage rate of less than one drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. It is equipped with EPDM seals, making it suitable for systems using phosphate ester fluids while avoiding exposure to petroleum-based substances which could degrade the seal quality. Additionally, the valve benefits from Sun Hydraulics' floating style construction which helps prevent internal parts from binding due to variations in installation torque or cartridge machining. The CXGDXDN model has a hex size of 1-1/4 inches (31.8 mm) and requires an installation torque between 150-160 lbf-ft (203-217 Nm). It weighs approximately 1.60 lbs (0.70 kg), making it robust yet manageable for integration into various hydraulic circuits. Ideal for applications where precise fluid control and reliability are paramount, this check valve enhances system efficiency while providing a solution for circuit correction needs without extensive modifications.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.60 lb0,70 kg |
| Seal kit - Cartridge | Viton: 990-016-006 |
Show FAQ