SUN HYDRAULICS
CXHAXAE
$191.01 USD
- SUN HYDRAULICS
- Material:CXHAXAE
- Model:CXHA-XAE
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXHAXAE (CXHAXAE) is a robust check valve designed to facilitate free flow from the inlet port 1 to the outlet port 2, while blocking flow in the opposite direction. This model is particularly noted for its high capacity of up to 80 gpm (320 L/min) and can withstand a maximum operating pressure of 5000 psi (350 bar). The CXHAXAE features extremely low leakage rates, maintaining less than 1 drop per minute (0.07 cc/min), which ensures efficiency and minimal fluid loss during operation. Constructed for durability, the CXHAXAE uses Viton seals within its cartridge configuration, suitable for systems utilizing phosphate ester fluids. It is crucial to avoid contact with petroleum-based fluids, as they can degrade these seals. Additionally, this model incorporates Sun's floating style construction which helps prevent internal parts binding that could arise from excessive installation torque or variations in cavity/cartridge machining. The valve has a hex size of 1 1/4 inches (31.8 mm) and requires an installation torque between 150 - 160 lbf.ft (203 - 217 Nm). Weighing at approximately 1.60 lbs (0.70 kg), it is designed to fit within a T16A cavity and belongs to the Series 3 line of Sun Hydraulics' products. This specific model does not include the corrosion-resistant suffix AP or LH, which are available in other models for enhanced durability in corrosive environments. Overall, the Sun Hydraulics CXHAXAE check valve is engineered for high-pressure applications where fluid control and prevention of backflow are critical, making it an essential component in various hydraulic systems.
The Sun Hydraulics CXHAXAE (CXHAXAE) is a robust check valve designed to facilitate free flow from the inlet port 1 to the outlet port 2, while blocking flow in the opposite direction. This model is particularly noted for its high capacity of up to 80 gpm (320 L/min) and can withstand a maximum operating pressure of 5000 psi (350 bar). The CXHAXAE features extremely low leakage rates, maintaining less than 1 drop per minute (0.07 cc/min), which ensures efficiency and minimal fluid loss during operation. Constructed for durability, the CXHAXAE uses Viton seals within its cartridge configuration, suitable for systems utilizing phosphate ester fluids. It is crucial to avoid contact with petroleum-based fluids, as they can degrade these seals. Additionally, this model incorporates Sun's floating style construction which helps prevent internal parts binding that could arise from excessive installation torque or variations in cavity/cartridge machining. The valve has a hex size of 1 1/4 inches (31.8 mm) and requires an installation torque between 150 - 160 lbf.ft (203 - 217 Nm). Weighing at approximately 1.60 lbs (0.70 kg), it is designed to fit within a T16A cavity and belongs to the Series 3 line of Sun Hydraulics' products. This specific model does not include the corrosion-resistant suffix AP or LH, which are available in other models for enhanced durability in corrosive environments. Overall, the Sun Hydraulics CXHAXAE check valve is engineered for high-pressure applications where fluid control and prevention of backflow are critical, making it an essential component in various hydraulic systems.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 80 gpm320 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.60 lb0,70 kg |
| Seal kit - Cartridge | Viton: 990-016-006 |
Show FAQ