SUN HYDRAULICS
CXIBLCV
$305.09 USD
- SUN HYDRAULICS
- Material:CXIBLCV
- Model:CXIB-LCV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXIBLCV (CXIBLCV) is designed as a free-flow, side-to-nose check valve that facilitates unidirectional flow from inlet port 2 to outlet port 1 while preventing reverse flow. Suited for medium pressure systems that may encounter dirty conditions, it features a Delrin seat which enhances its durability and performance in environments not characterized by high flows or extreme temperatures. This model is particularly beneficial in circuits where manifold drillings have been inaccurately executed, acting as a circuit saver by providing an alternative solution without the need for extensive modifications. The CXIBLCV can handle a flow capacity of up to 120 gpm (480 L/min) and withstands a maximum operating pressure of 3000 psi (210 bar). It exhibits exceptionally low leakage rates, maintaining less than one drop per minute (0.07 cc/min), thereby ensuring efficient and reliable operation. The valve's construction incorporates Sun's floating style design which minimizes the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining. For installation, the valve requires a hex size of 1 5/8 inches (41.3 mm) and an installation torque between 350 \u2013 375 lbf\u00b7ft (474 \u2013 508 Nm). It weighs approximately 2.10 lbs (0.95 kg), making it robust yet manageable for system integration. The CXIBLCV uses Viton seals for enhanced performance under varying operational conditions, ensuring longevity and reliability in various hydraulic applications.
The Sun Hydraulics CXIBLCV (CXIBLCV) is designed as a free-flow, side-to-nose check valve that facilitates unidirectional flow from inlet port 2 to outlet port 1 while preventing reverse flow. Suited for medium pressure systems that may encounter dirty conditions, it features a Delrin seat which enhances its durability and performance in environments not characterized by high flows or extreme temperatures. This model is particularly beneficial in circuits where manifold drillings have been inaccurately executed, acting as a circuit saver by providing an alternative solution without the need for extensive modifications. The CXIBLCV can handle a flow capacity of up to 120 gpm (480 L/min) and withstands a maximum operating pressure of 3000 psi (210 bar). It exhibits exceptionally low leakage rates, maintaining less than one drop per minute (0.07 cc/min), thereby ensuring efficient and reliable operation. The valve's construction incorporates Sun's floating style design which minimizes the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining. For installation, the valve requires a hex size of 1 5/8 inches (41.3 mm) and an installation torque between 350 \u2013 375 lbf\u00b7ft (474 \u2013 508 Nm). It weighs approximately 2.10 lbs (0.95 kg), making it robust yet manageable for system integration. The CXIBLCV uses Viton seals for enhanced performance under varying operational conditions, ensuring longevity and reliability in various hydraulic applications.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- The Delrin seat is suitable for dirty, medium pressure systems that are not subjected to high flows or temperatures.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-18A |
| Series | 4 |
| Capacity | 120 gpm480 L/min. |
| Maximum Operating Pressure | 3000 psi210 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 5/8 in.41,3 mm |
| Valve Installation Torque | 350 - 375 lbf ft474 - 508 Nm |
| Model Weight | 2.10 lb0,95 kg |
| Seal kit - Cartridge | Viton: 990-018-006 |
Show FAQ