SUN HYDRAULICS
CXIBLFV
$307.07 USD
- SUN HYDRAULICS
- Material:CXIBLFV
- Model:CXIB-LFV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXIBLFV (CXIBLFV) is a robust sidet-to-nose check valve designed for hydraulic systems that require reliable, one-way flow control. The valve allows free flow from the inlet port 2 to the outlet port 1 while preventing backflow in the reverse direction. This makes it particularly useful in systems where incorrect manifold drillings need correction without redesigning the entire circuit. With a Delrin seat, the CXIBLFV is suited for medium pressure applications where the fluid may contain some level of contaminants. The valve features Sun Hydraulics' floating style construction which aids in reducing potential binding of internal components due to over-torquing or variations in cavity or cartridge machining. It supports a maximum operating pressure of 3000 psi (210 bar) and has an impressive capacity of up to 120 gpm (480 L/min). Despite its high-flow capabilities, it maintains an extremely low leakage rate, not exceeding 1 drop per minute (0.07 cc/min). For installation, the valve requires a hex size of 1-5/8 inches (41.3 mm) and an installation torque between 350 - 375 lbf\u00b7ft (474 - 508 Nm). Weighing at approximately 2.10 lbs (0.95 kg), it also includes options for Viton seals and cartridges, enhancing its versatility and suitability across various hydraulic setups. The T18A cavity and Series 4 specifications further define its compatibility and integration ease within existing hydraulic systems, making it an ideal choice for enhancing circuit efficiency without extensive modifications.
The Sun Hydraulics CXIBLFV (CXIBLFV) is a robust sidet-to-nose check valve designed for hydraulic systems that require reliable, one-way flow control. The valve allows free flow from the inlet port 2 to the outlet port 1 while preventing backflow in the reverse direction. This makes it particularly useful in systems where incorrect manifold drillings need correction without redesigning the entire circuit. With a Delrin seat, the CXIBLFV is suited for medium pressure applications where the fluid may contain some level of contaminants. The valve features Sun Hydraulics' floating style construction which aids in reducing potential binding of internal components due to over-torquing or variations in cavity or cartridge machining. It supports a maximum operating pressure of 3000 psi (210 bar) and has an impressive capacity of up to 120 gpm (480 L/min). Despite its high-flow capabilities, it maintains an extremely low leakage rate, not exceeding 1 drop per minute (0.07 cc/min). For installation, the valve requires a hex size of 1-5/8 inches (41.3 mm) and an installation torque between 350 - 375 lbf\u00b7ft (474 - 508 Nm). Weighing at approximately 2.10 lbs (0.95 kg), it also includes options for Viton seals and cartridges, enhancing its versatility and suitability across various hydraulic setups. The T18A cavity and Series 4 specifications further define its compatibility and integration ease within existing hydraulic systems, making it an ideal choice for enhancing circuit efficiency without extensive modifications.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the outlet (port 1) and block flow in the opposite direction.
- The Delrin seat is suitable for dirty, medium pressure systems that are not subjected to high flows or temperatures.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-18A |
| Series | 4 |
| Capacity | 120 gpm480 L/min. |
| Maximum Operating Pressure | 3000 psi210 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 1 5/8 in.41,3 mm |
| Valve Installation Torque | 350 - 375 lbf ft474 - 508 Nm |
| Model Weight | 2.10 lb0,95 kg |
| Seal kit - Cartridge | Viton: 990-018-006 |
Show FAQ