SUN HYDRAULICS
DCCAXAN
$177.41 USD
- SUN HYDRAULICS
- Material:DCCAXAN
- Model:DCCA-XAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DCCAXAN (DCCAXAN) is a three-position, 4-way directional cartridge valve featuring a spring-centered, 6-port configuration. This valve can be customized with one of ten different spool options to suit various hydraulic system requirements. Each port on the DCCAXAN, including the X and Y pilot ports (ports 5 and 6), can handle pressures up to 5000 psi (350 bar). The flow capacity ranges between 7 to 10 gallons per minute (28 to 40 liters per minute), depending on the specific spool type chosen. This model is designed for robust performance with hardened spool and sleeve that not only ensure low leakage rates but also provide excellent wear characteristics. It also incorporates Sun\u2019s floating style construction which minimizes internal parts binding that could be caused by excessive installation torque or variations in cavity/cartridge machining. Key technical specifications include a minimum pilot pressure requirement of 175 psi (12 bar) for valve shifting, maximum operating pressure of 5000 psi (350 bar), and maximum valve leakage at 110 SUS (24 cSt) being limited to 2 in\u00b3/min at 1000 psi (30 cc/min at 70 bar). The valve's hex size is set at 7/8 inches (22.2 mm) and requires an installation torque between 30 -35 lbf ft (41 -47 Nm). Each unit weighs approximately .40 lbs (.20 kg). For maintenance or repairs, a Viton seal kit for this model is available under part number: 990061006.
The Sun Hydraulics DCCAXAN (DCCAXAN) is a three-position, 4-way directional cartridge valve featuring a spring-centered, 6-port configuration. This valve can be customized with one of ten different spool options to suit various hydraulic system requirements. Each port on the DCCAXAN, including the X and Y pilot ports (ports 5 and 6), can handle pressures up to 5000 psi (350 bar). The flow capacity ranges between 7 to 10 gallons per minute (28 to 40 liters per minute), depending on the specific spool type chosen. This model is designed for robust performance with hardened spool and sleeve that not only ensure low leakage rates but also provide excellent wear characteristics. It also incorporates Sun\u2019s floating style construction which minimizes internal parts binding that could be caused by excessive installation torque or variations in cavity/cartridge machining. Key technical specifications include a minimum pilot pressure requirement of 175 psi (12 bar) for valve shifting, maximum operating pressure of 5000 psi (350 bar), and maximum valve leakage at 110 SUS (24 cSt) being limited to 2 in\u00b3/min at 1000 psi (30 cc/min at 70 bar). The valve's hex size is set at 7/8 inches (22.2 mm) and requires an installation torque between 30 -35 lbf ft (41 -47 Nm). Each unit weighs approximately .40 lbs (.20 kg). For maintenance or repairs, a Viton seal kit for this model is available under part number: 990061006.
Three-position, 4-way directional cartridges are spring-centered, 6-port directional valves that can be configured from a choice of 10 different spool options. The supply port is port 1 and all ports will accept 5000 psi (350 bar). Capacity for these pilot-to-shift valves is dependent on the spool type specified.
- All ports will accept 5000 psi (350 bar), including the x and y pilot ports (port 5 and port 6).
- Leakage listed in technical data is for each path.
- Hardened spool and sleeve provide consistent and low spool leakage rates and excellent wear characteristics.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-61A |
| Series | 1 |
| Capacity | 7 - 10 gpm28 - 40 L/min. |
| Minimum Pilot Pressure Required to Shift Valve | 175 psi12 bar |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.@1000 psi30 cc/min.@70 bar |
| Pilot Volume Displacement | .02 in³0,33 cc |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .40 lb0,20 kg |
| Seal kit - Cartridge | Viton: 990-061-006 |
Show FAQ