SUN HYDRAULICS
DMDADAV2E24V
$426.61 USD
- SUN HYDRAULICS
- Material:DMDADAV2E24V
- Model:DMDA-DAV@2E24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDADAV2E24V (DMDADAV2E24V) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for precise hydraulic control. This direct-acting, balanced spool directional valve features a robust construction with a solenoid tube assembly that is fatigue rated for 5000 psi (350 bar) service, ensuring reliable operation under high-pressure conditions. The valve offers closed transitions between Spools B and R, enhancing performance by providing faster and more consistent response times especially in pilot control applications where capacity is less critical. Equipped with EPDM seals, the DMDADAV2E24V is suitable for systems using phosphate ester fluids, while exposure to petroleum-based fluids should be avoided to prevent seal damage. The wet armature design of the valve means that the working fluid surrounds the armature which could be subjected to heat if the coil remains energized over extended periods. This feature requires consideration of fluid characteristics as some may degrade under heat. This model also supports interchangeable coils with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. It incorporates Sun\u2019s floating style construction which minimizes internal parts binding caused by excessive installation torque or variations in cavity/cartridge machining. With a maximum operating pressure of 5000 psi (350 bar) and a flow capacity of 12 gpm (45 L/min), this valve is designed for efficient operation with typical response times around 50 ms and maximum leakage at high pressure kept minimal. The manual override feature requires a force of about 5 lbs at 1000 psi for operation, and it has been engineered for approximately 7,000 cycles of mechanical life expectancy. This makes the DMDADAV2E24V an ideal choice for applications requiring reliable manual intervention without compromising on automated hydraulic control capabilities.
The Sun Hydraulics DMDADAV2E24V (DMDADAV2E24V) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for precise hydraulic control. This direct-acting, balanced spool directional valve features a robust construction with a solenoid tube assembly that is fatigue rated for 5000 psi (350 bar) service, ensuring reliable operation under high-pressure conditions. The valve offers closed transitions between Spools B and R, enhancing performance by providing faster and more consistent response times especially in pilot control applications where capacity is less critical. Equipped with EPDM seals, the DMDADAV2E24V is suitable for systems using phosphate ester fluids, while exposure to petroleum-based fluids should be avoided to prevent seal damage. The wet armature design of the valve means that the working fluid surrounds the armature which could be subjected to heat if the coil remains energized over extended periods. This feature requires consideration of fluid characteristics as some may degrade under heat. This model also supports interchangeable coils with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. It incorporates Sun\u2019s floating style construction which minimizes internal parts binding caused by excessive installation torque or variations in cavity/cartridge machining. With a maximum operating pressure of 5000 psi (350 bar) and a flow capacity of 12 gpm (45 L/min), this valve is designed for efficient operation with typical response times around 50 ms and maximum leakage at high pressure kept minimal. The manual override feature requires a force of about 5 lbs at 1000 psi for operation, and it has been engineered for approximately 7,000 cycles of mechanical life expectancy. This makes the DMDADAV2E24V an ideal choice for applications requiring reliable manual intervention without compromising on automated hydraulic control capabilities.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Spools B and R are closed in the transition between their two positions. This results in a higher performance limit at the expense of lower capacity. When used as pilot controls, where capacity is not a factor, the closed transition will provide faster and more consistent response times.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ