SUN HYDRAULICS
DMDADPV72499
$253.96 USD
- SUN HYDRAULICS
- Material:DMDADPV72499
- Model:DMDA-DPV@72499
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDADPV72499 (DMDADPV72499) is a high-performance solenoid-operated 3-way, 2-position cartridge valve. This direct-acting, balanced spool directional valve is designed for robust handling of hydraulic control applications with a maximum operating pressure of 5000 psi (350 bar) and a flow capacity up to 12 gpm (45 L/min). The valve features a fatigue-rated solenoid tube assembly, ensuring durability and reliability even under intense operational conditions. It incorporates closed transitions between spools B and R, enhancing performance by providing faster and more consistent response times, particularly suitable for pilot control applications where capacity is less critical. The wet armature design allows the working fluid to surround the armature, which helps in heat management but requires careful consideration of fluid type to avoid breakdown and varnish formation that could impair functionality. This model is compatible with EPDM seals specifically for use with phosphate ester fluids; however, it is sensitive to petroleum-based fluids which can damage these seals. Additionally, the manual override feature equipped with D or L control on this valve uses a detent mechanism designed for temporary actuation only, supporting a mechanical life expectancy of about 7,000 cycles. The DMDADPV72499 also features interchangeable coils compatible with other Sun Series 1 solenoid products and supports installation flexibility due to its floating style construction which minimizes internal parts binding. This makes it an adaptable solution for various hydraulic system configurations needing precise control and reliability.
The Sun Hydraulics DMDADPV72499 (DMDADPV72499) is a high-performance solenoid-operated 3-way, 2-position cartridge valve. This direct-acting, balanced spool directional valve is designed for robust handling of hydraulic control applications with a maximum operating pressure of 5000 psi (350 bar) and a flow capacity up to 12 gpm (45 L/min). The valve features a fatigue-rated solenoid tube assembly, ensuring durability and reliability even under intense operational conditions. It incorporates closed transitions between spools B and R, enhancing performance by providing faster and more consistent response times, particularly suitable for pilot control applications where capacity is less critical. The wet armature design allows the working fluid to surround the armature, which helps in heat management but requires careful consideration of fluid type to avoid breakdown and varnish formation that could impair functionality. This model is compatible with EPDM seals specifically for use with phosphate ester fluids; however, it is sensitive to petroleum-based fluids which can damage these seals. Additionally, the manual override feature equipped with D or L control on this valve uses a detent mechanism designed for temporary actuation only, supporting a mechanical life expectancy of about 7,000 cycles. The DMDADPV72499 also features interchangeable coils compatible with other Sun Series 1 solenoid products and supports installation flexibility due to its floating style construction which minimizes internal parts binding. This makes it an adaptable solution for various hydraulic system configurations needing precise control and reliability.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Spools B and R are closed in the transition between their two positions. This results in a higher performance limit at the expense of lower capacity. When used as pilot controls, where capacity is not a factor, the closed transition will provide faster and more consistent response times.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ