SUN HYDRAULICS
DMDALAV236
$233.11 USD
- SUN HYDRAULICS
- Material:DMDALAV236
- Model:DMDA-LAV@236
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDALAV236 (DMDALAV236) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for rigorous hydraulic applications. This direct-acting, balanced spool directional valve operates without a minimum hydraulic pressure requirement, making it highly effective in a variety of settings. The valve features a unique closed transition between Spools B and R, enhancing performance by ensuring faster and more consistent response times ideal for pilot control applications where capacity is less critical. Constructed to handle maximum operating pressures up to 5000 psi (350 bar), the DMDALAV236 is also fatigue rated for the same, ensuring durability and reliability in demanding environments. It boasts a flow capacity of 12 gpm (45 L/min) and incorporates a wet armature design which allows the working fluid to surround the armature, crucial for heat management during prolonged coil energization. Manual override options are available with detent mechanisms designed for temporary actuation, supporting mechanical life expectancies around 7,000 cycles. The valve's switching frequency capability reaches up to 15,000 cycles/hr, with typical response times clocked at around 50 ms. Furthermore, it supports interchangeable coils with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. For enhanced operational integrity and ease of installation, this model uses Sun\u2019s floating style construction to minimize internal parts binding due to excessive installation torque or cavity/cartridge machining variations. The DMDALAV236 also offers compatibility with EPDM seals specifically for use with phosphate ester fluids; however, exposure to petroleum-based fluids should be avoided as it can damage the seals.
The Sun Hydraulics DMDALAV236 (DMDALAV236) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for rigorous hydraulic applications. This direct-acting, balanced spool directional valve operates without a minimum hydraulic pressure requirement, making it highly effective in a variety of settings. The valve features a unique closed transition between Spools B and R, enhancing performance by ensuring faster and more consistent response times ideal for pilot control applications where capacity is less critical. Constructed to handle maximum operating pressures up to 5000 psi (350 bar), the DMDALAV236 is also fatigue rated for the same, ensuring durability and reliability in demanding environments. It boasts a flow capacity of 12 gpm (45 L/min) and incorporates a wet armature design which allows the working fluid to surround the armature, crucial for heat management during prolonged coil energization. Manual override options are available with detent mechanisms designed for temporary actuation, supporting mechanical life expectancies around 7,000 cycles. The valve's switching frequency capability reaches up to 15,000 cycles/hr, with typical response times clocked at around 50 ms. Furthermore, it supports interchangeable coils with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. For enhanced operational integrity and ease of installation, this model uses Sun\u2019s floating style construction to minimize internal parts binding due to excessive installation torque or cavity/cartridge machining variations. The DMDALAV236 also offers compatibility with EPDM seals specifically for use with phosphate ester fluids; however, exposure to petroleum-based fluids should be avoided as it can damage the seals.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Spools B and R are closed in the transition between their two positions. This results in a higher performance limit at the expense of lower capacity. When used as pilot controls, where capacity is not a factor, the closed transition will provide faster and more consistent response times.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ