SUN HYDRAULICS
DMDAMPV924

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDAMPV924 (DMDAMPV924) is a solenoid-operated 3-way, 2-position cartridge valve that serves as a direct-acting, balanced spool directional valve. Designed for robust performance, this valve features a fatigue rating for up to 5000 psi (350 bar) service, making it suitable for high-pressure applications. The valve operates with no minimum hydraulic pressure required, providing flexibility and reliability in various operational conditions. The DMDAMPV924 incorporates closed transitions between Spools B and R, enhancing performance by offering faster and more consistent response times particularly when used as pilot controls. This design aspect makes it ideal for applications where capacity is less crucial but speed and reliability are paramount. Additionally, the manual override feature equipped with the D or L control uses a detent mechanism intended for temporary actuation, supporting a mechanical life expectancy of approximately 7,000 cycles. This model is compatible with EPDM seals specifically designed for use with phosphate ester fluids; however, these seals must avoid exposure to petroleum-based fluids which could cause damage. The wet armature design of the valve means that the working fluid surrounds the armature which could be subject to heat if the coil remains energized over extended periods, potentially affecting fluid integrity and valve functionality. For installation versatility, the DMDAMPV924\u2019s coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. It also features Sun's floating style construction which minimizes internal parts binding due to excessive installation torque or cavity/cartridge machining variations. This model offers a maximum operating pressure of 5000 psi (350 bar), a flow capacity of up to 12 gpm (45 L/min), and typical response times of 50 ms.