SUN HYDRAULICS
DMDASBN528
$162.02 USD
- SUN HYDRAULICS
- Material:DMDASBN528
- Model:DMDA-SBN@528
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDASBN528 (DMDASBN528) is a high-performance, solenoid-operated 3-way, 2-position cartridge valve designed for various hydraulic applications. This direct-acting, balanced spool directional valve features a unique soft shift capability which moderates the shock typically associated with valve actuation. The soft shift model is interchangeable with standard cartridges but offers reduced performance limits, making it less suitable for applications requiring precise timing control such as accurate ramping. Users needing stringent control should consider Sun's electro-proportional valves instead. The response time of the DMDASBN528 varies from 150 ms to 300 ms, influenced by factors like flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. It is essential that port 1 maintains positive pressure for consistent performance of the soft shift feature. The valve includes a push-type manual override and is compatible with different manual control options available for field installation\u2014except when combined with weatherized coils. Constructed to handle pressures up to 5000 psi (350 bar), the solenoid tube assembly of this valve is fatigue rated for demanding conditions. The wet armature design helps in heat management around the coil but requires careful consideration of fluid characteristics to avoid degradation like varnish formation in water-glycol mixtures. For environmental resilience, additional weatherized coils and kits are available, and coil connector options can be rated up to IP69K for enhanced protection against ingress. The floating style construction of Sun Hydraulics minimizes internal part binding due to installation or machining discrepancies. This model supports a maximum flow capacity of 5 gpm (20 L/min) and features robust EPDM seals specifically designed for systems using phosphate ester fluids; these seals are vulnerable to damage from exposure to petroleum-based substances.
The Sun Hydraulics DMDASBN528 (DMDASBN528) is a high-performance, solenoid-operated 3-way, 2-position cartridge valve designed for various hydraulic applications. This direct-acting, balanced spool directional valve features a unique soft shift capability which moderates the shock typically associated with valve actuation. The soft shift model is interchangeable with standard cartridges but offers reduced performance limits, making it less suitable for applications requiring precise timing control such as accurate ramping. Users needing stringent control should consider Sun's electro-proportional valves instead. The response time of the DMDASBN528 varies from 150 ms to 300 ms, influenced by factors like flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. It is essential that port 1 maintains positive pressure for consistent performance of the soft shift feature. The valve includes a push-type manual override and is compatible with different manual control options available for field installation\u2014except when combined with weatherized coils. Constructed to handle pressures up to 5000 psi (350 bar), the solenoid tube assembly of this valve is fatigue rated for demanding conditions. The wet armature design helps in heat management around the coil but requires careful consideration of fluid characteristics to avoid degradation like varnish formation in water-glycol mixtures. For environmental resilience, additional weatherized coils and kits are available, and coil connector options can be rated up to IP69K for enhanced protection against ingress. The floating style construction of Sun Hydraulics minimizes internal part binding due to installation or machining discrepancies. This model supports a maximum flow capacity of 5 gpm (20 L/min) and features robust EPDM seals specifically designed for systems using phosphate ester fluids; these seals are vulnerable to damage from exposure to petroleum-based substances.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependent on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 5 gpm20 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
Show FAQ