SUN HYDRAULICS
DMDASBNHN24AA
$1,359.64 USD
- SUN HYDRAULICS
- Material:DMDASBNHN24AA
- Model:DMDA-SBN-HN@24AA
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDASBNHN24AA (DMDASBNHN24AA) is a solenoid-operated 3-way, 2-position cartridge valve designed for hydraulic systems. This direct-acting, balanced spool directional valve features a soft shift option that reduces shock during valve actuation, though it is not suitable for applications requiring precise timing control. With typical response times ranging from 150 ms to 300 ms, the valve's performance is influenced by factors such as flow, pressure, coil voltage, oil viscosity, and ambient temperature. Equipped with a push-type manual override control, the DMDASBNHN24AA offers flexibility in manual operations; however, it is incompatible with weatherized coils. The valve\u2019s solenoid tube assembly is fatigue rated for up to 5000 psi (350 bar), ensuring robust performance under high-pressure conditions. It also incorporates Sun\u2019s floating style construction which minimizes internal parts binding due to installation torque or cavity/cartridge machining variations. This model uses EPDM seals suitable for phosphate ester fluids but can be damaged by exposure to petroleum-based substances. Additionally, its wet armature design means that the working fluid surrounds the armature which could lead to breakdowns in certain fluids over extended periods of energization. The magnetic design of the solenoid provides high efficiency and reliable valve shifting with various coil connector options available up to IP69K for enhanced environmental protection. Key specifications include a maximum operating pressure of 5000 psi (350 bar), a flow capacity of up to 5 gpm (20 L/min), and minimal leakage at high pressures. The manual override requires a force of about 5 lbs at 1000 psi on port 1, with a stroke length of .10 inches (2.5 mm). This model weighs approximately .60 lb (0.30 kg) and has installation torque requirements between 30 \u2013 35 lbf ft (41 \u2013 47 Nm).
The Sun Hydraulics DMDASBNHN24AA (DMDASBNHN24AA) is a solenoid-operated 3-way, 2-position cartridge valve designed for hydraulic systems. This direct-acting, balanced spool directional valve features a soft shift option that reduces shock during valve actuation, though it is not suitable for applications requiring precise timing control. With typical response times ranging from 150 ms to 300 ms, the valve's performance is influenced by factors such as flow, pressure, coil voltage, oil viscosity, and ambient temperature. Equipped with a push-type manual override control, the DMDASBNHN24AA offers flexibility in manual operations; however, it is incompatible with weatherized coils. The valve\u2019s solenoid tube assembly is fatigue rated for up to 5000 psi (350 bar), ensuring robust performance under high-pressure conditions. It also incorporates Sun\u2019s floating style construction which minimizes internal parts binding due to installation torque or cavity/cartridge machining variations. This model uses EPDM seals suitable for phosphate ester fluids but can be damaged by exposure to petroleum-based substances. Additionally, its wet armature design means that the working fluid surrounds the armature which could lead to breakdowns in certain fluids over extended periods of energization. The magnetic design of the solenoid provides high efficiency and reliable valve shifting with various coil connector options available up to IP69K for enhanced environmental protection. Key specifications include a maximum operating pressure of 5000 psi (350 bar), a flow capacity of up to 5 gpm (20 L/min), and minimal leakage at high pressures. The manual override requires a force of about 5 lbs at 1000 psi on port 1, with a stroke length of .10 inches (2.5 mm). This model weighs approximately .60 lb (0.30 kg) and has installation torque requirements between 30 \u2013 35 lbf ft (41 \u2013 47 Nm).
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependent on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 5 gpm20 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
Show FAQ