SUN HYDRAULICS
DMDASBV624N
$162.42 USD
- SUN HYDRAULICS
- Material:DMDASBV624N
- Model:DMDA-SBV@624N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDASBV624N (DMDASBV624N) is a solenoid-operated, 3-way, 2-position cartridge valve that features a direct-acting, balanced spool design. This model is equipped with a soft shift feature designed to mitigate shock during valve actuation, although it is not suitable for applications where precise timing control is critical. For such needs, Sun Hydraulics suggests considering their electro-proportional valves instead. The soft shift model offers slower response times compared to standard solenoid valves, typically ranging from 150 ms to 300 ms depending on various factors like flow rate, pressure, and ambient temperature. This valve supports a maximum operating pressure of 5000 psi (350 bar) and has a flow capacity of up to 5 gpm (20 L/min). It includes a push-type manual override control and features an installation torque range of 30-35 lbf\u00b7ft (41-47 Nm). The solenoid tube assembly in this model is fatigue rated for high-pressure service. Notably, the valve uses EPDM seals which are compatible with phosphate ester fluids but should avoid exposure to petroleum-based substances. Additional highlights include its wet armature design where the working fluid surrounds the armature\u2014important in scenarios where the coil remains energized for extended periods as this can affect fluid integrity over time. The valve's magnetic design enhances solenoid efficiency, providing robust spool actuating force per watt expended. It also incorporates Sun's floating style construction which helps prevent internal parts from binding due to excessive installation torque or variations in cavity/cartridge machining. For environmental protection beyond standard configurations, weatherized coils and kits are available as well.
The Sun Hydraulics DMDASBV624N (DMDASBV624N) is a solenoid-operated, 3-way, 2-position cartridge valve that features a direct-acting, balanced spool design. This model is equipped with a soft shift feature designed to mitigate shock during valve actuation, although it is not suitable for applications where precise timing control is critical. For such needs, Sun Hydraulics suggests considering their electro-proportional valves instead. The soft shift model offers slower response times compared to standard solenoid valves, typically ranging from 150 ms to 300 ms depending on various factors like flow rate, pressure, and ambient temperature. This valve supports a maximum operating pressure of 5000 psi (350 bar) and has a flow capacity of up to 5 gpm (20 L/min). It includes a push-type manual override control and features an installation torque range of 30-35 lbf\u00b7ft (41-47 Nm). The solenoid tube assembly in this model is fatigue rated for high-pressure service. Notably, the valve uses EPDM seals which are compatible with phosphate ester fluids but should avoid exposure to petroleum-based substances. Additional highlights include its wet armature design where the working fluid surrounds the armature\u2014important in scenarios where the coil remains energized for extended periods as this can affect fluid integrity over time. The valve's magnetic design enhances solenoid efficiency, providing robust spool actuating force per watt expended. It also incorporates Sun's floating style construction which helps prevent internal parts from binding due to excessive installation torque or variations in cavity/cartridge machining. For environmental protection beyond standard configurations, weatherized coils and kits are available as well.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependent on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 5 gpm20 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
Show FAQ