SUN HYDRAULICS
DMDASPV712N
$171.75 USD
- SUN HYDRAULICS
- Material:DMDASPV712N
- Model:DMDA-SPV@712N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDASPV712N (DMDASPV712N) is a solenoid-operated 3-way, 2-position cartridge valve designed for precise hydraulic fluid direction control. This direct-acting, balanced spool directional valve features a soft shift option that moderates the shock typically associated with valve actuation. While it enhances the operational smoothness, it is not suitable for applications requiring critical timing or precise ramping control, where electro-proportional valves might be preferable. The soft shift model has a slower response time compared to standard solenoids from Sun Hydraulics, with typical response times varying from 150 ms to 300 ms depending on factors such as flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. To ensure optimal performance of the soft shift feature, it is recommended that port 1 maintains positive pressure. This model also includes a push-type manual override and is compatible with various manual control options which can be field-installed. However, these functionalities are not applicable with weatherized coils. The solenoid's construction features a fatigue rating for up to 5000 psi (350 bar) service and incorporates EPDM seals specifically for use with phosphate ester fluids; exposure to petroleum-based substances can damage these seals. The DMDASPV712N operates effectively within a maximum operating pressure of 5000 psi (350 bar) and handles flow capacities up to 5 gpm (20 L/min). The valve's wet armature design implies that the heat generated by the coil directly affects the working fluid which could degrade certain fluid types over extended periods of energization. Additional features include an IP69K-rated coil connector options for enhanced environmental protection and Sun\u2019s floating style construction to prevent internal binding due to installation stresses or machining variations.
The Sun Hydraulics DMDASPV712N (DMDASPV712N) is a solenoid-operated 3-way, 2-position cartridge valve designed for precise hydraulic fluid direction control. This direct-acting, balanced spool directional valve features a soft shift option that moderates the shock typically associated with valve actuation. While it enhances the operational smoothness, it is not suitable for applications requiring critical timing or precise ramping control, where electro-proportional valves might be preferable. The soft shift model has a slower response time compared to standard solenoids from Sun Hydraulics, with typical response times varying from 150 ms to 300 ms depending on factors such as flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. To ensure optimal performance of the soft shift feature, it is recommended that port 1 maintains positive pressure. This model also includes a push-type manual override and is compatible with various manual control options which can be field-installed. However, these functionalities are not applicable with weatherized coils. The solenoid's construction features a fatigue rating for up to 5000 psi (350 bar) service and incorporates EPDM seals specifically for use with phosphate ester fluids; exposure to petroleum-based substances can damage these seals. The DMDASPV712N operates effectively within a maximum operating pressure of 5000 psi (350 bar) and handles flow capacities up to 5 gpm (20 L/min). The valve's wet armature design implies that the heat generated by the coil directly affects the working fluid which could degrade certain fluid types over extended periods of energization. Additional features include an IP69K-rated coil connector options for enhanced environmental protection and Sun\u2019s floating style construction to prevent internal binding due to installation stresses or machining variations.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependent on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 5 gpm20 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
Show FAQ