SUN HYDRAULICS
DMDASRN71219
$172.65 USD
- SUN HYDRAULICS
- Material:DMDASRN71219
- Model:DMDA-SRN@71219
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDASRN71219 (DMDASRN71219) is a solenoid-operated 3-way, 2-position cartridge valve designed for efficient control in hydraulic systems. This direct-acting, balanced spool directional valve features a unique soft shift option that moderates the shock typically associated with valve actuation, enhancing system longevity by reducing mechanical stresses. While this soft shift feature slows response times to between 150 ms and 300 ms\u2014dependent on various factors like flow rate and oil viscosity\u2014it is not suitable for applications requiring precise timing or ramping control. The DMDASRN71219 incorporates a manual override with a push-type control, offering flexibility during system troubleshooting or manual operation; however, it is important to note that weatherized coil options are incompatible with this manual override functionality. The valve's construction includes EPDM seals specifically for use with phosphate ester fluids, avoiding exposure to petroleum-based substances which could cause damage. Rated for up to 5000 psi (350 bar), the solenoid tube assembly of this model is fatigue rated, ensuring durability under high-pressure conditions. The design also features Sun\u2019s floating style construction which minimizes internal part binding due to installation variances or excessive torque application. Additionally, the wet armature design indicates that the working fluid surrounds the armature, potentially affecting fluid integrity over prolonged energized periods. This model supports up to 5 gpm (20 L/min) flow capacity and offers various coil connector options rated up to IP69K for enhanced environmental protection against dust and water ingress. With a compact hex size of 7/8 inch (22.2 mm) and an installation torque requirement between 30-35 lbf ft (41-47 Nm), the DMDASRN71219 combines robust performance with ease of installation in diverse hydraulic applications.
The Sun Hydraulics DMDASRN71219 (DMDASRN71219) is a solenoid-operated 3-way, 2-position cartridge valve designed for efficient control in hydraulic systems. This direct-acting, balanced spool directional valve features a unique soft shift option that moderates the shock typically associated with valve actuation, enhancing system longevity by reducing mechanical stresses. While this soft shift feature slows response times to between 150 ms and 300 ms\u2014dependent on various factors like flow rate and oil viscosity\u2014it is not suitable for applications requiring precise timing or ramping control. The DMDASRN71219 incorporates a manual override with a push-type control, offering flexibility during system troubleshooting or manual operation; however, it is important to note that weatherized coil options are incompatible with this manual override functionality. The valve's construction includes EPDM seals specifically for use with phosphate ester fluids, avoiding exposure to petroleum-based substances which could cause damage. Rated for up to 5000 psi (350 bar), the solenoid tube assembly of this model is fatigue rated, ensuring durability under high-pressure conditions. The design also features Sun\u2019s floating style construction which minimizes internal part binding due to installation variances or excessive torque application. Additionally, the wet armature design indicates that the working fluid surrounds the armature, potentially affecting fluid integrity over prolonged energized periods. This model supports up to 5 gpm (20 L/min) flow capacity and offers various coil connector options rated up to IP69K for enhanced environmental protection against dust and water ingress. With a compact hex size of 7/8 inch (22.2 mm) and an installation torque requirement between 30-35 lbf ft (41-47 Nm), the DMDASRN71219 combines robust performance with ease of installation in diverse hydraulic applications.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependent on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 5 gpm20 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
Show FAQ