SUN HYDRAULICS
DMDATBN714

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDATBN714 (DMDATBN714) is a high-performance solenoid-operated 3-way, 2-position cartridge valve, designed for direct-acting, balanced spool directional control. This valve features a fatigued rated solenoid tube assembly suitable for 5000 psi (350 bar) service, ensuring durability and reliability under high-pressure conditions. The DMDATBN714 is notable for its closed transition between Spools B and R, optimizing performance by providing faster and more consistent response times particularly in pilot control applications where flow capacity is less critical. This model operates without requiring a minimum hydraulic pressure, enhancing its versatility across various applications. It includes options for manual override controls (D, L, T types), which are primarily intended for temporary actuation with a mechanical life expectancy of around 7,000 cycles. The valve's design incorporates EPDM seals configured specifically for use with phosphate ester fluids; however, these seals are susceptible to damage when exposed to petroleum-based substances. A key feature of the DMDATBN714 is its wet armature design where the working fluid surrounds the armature. This setup can influence fluid integrity if the coil remains energized over extended periods due to heat exposure. Additionally, this model supports interchangeable coils with other Sun Series 1 solenoid products and can be mounted in any direction on the tube. The construction utilizes Sun\u2019s floating style to minimize internal part binding caused by excessive installation torque or variations in cavity/cartridge machining. With a capacity of 12 gpm (45 L/min) and rapid response time typically around 50 ms, along with maximum operating pressures up to 5000 psi (350 bar), the DMDATBN714 serves as an efficient solution in various hydraulic systems requiring precise flow direction control under high pressure conditions.