SUN HYDRAULICS
DMDATRN714

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDATRN714 (DMDATRN714) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for use in hydraulic systems. This direct-acting, balanced spool directional valve operates with a maximum capacity of 12 gpm/45 L/min and can withstand a maximum operating pressure of 5000 psi/350 bar. The valve features closed transitions between Spools B and R, enhancing performance by providing faster and more consistent response times particularly suitable for pilot control applications where capacity is less critical. The DMDATRN714 incorporates a wet armature design, allowing the working fluid to surround the armature which helps in heat dissipation but requires careful selection of fluid to avoid breakdown and varnish formation that could impair valve operation. Its manual override feature is equipped with a detent mechanism designed for temporary actuation with an expected mechanical life of approximately 7,000 cycles. This model uses EPDM seals specifically for systems utilizing phosphate ester fluids; however, these seals are susceptible to damage if exposed to petroleum-based fluids. The interchangeable coils are compatible with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Additionally, this valve benefits from Sun's floating style construction which minimizes internal parts binding due to installation torque or machining variations. With a fast typical response time of 50 ms, switching frequency up to 15,000 cycles/hr, and minimal leakage at high pressures (5 in\u00b3/min at 3000 psi), the DMDATRN714 is optimized for robust and reliable performance in demanding hydraulic applications.