SUN HYDRAULICS
DMDAXNV814N
$200.65 USD
- SUN HYDRAULICS
- Material:DMDAXNV814N
- Model:DMDA-XNV@814N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDAXNV814N (DMDAXNV814N) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for precise hydraulic control. This direct-acting, balanced spool directional valve features a robust design with a fatigue rating of 5000 psi (350 bar), making it suitable for high-pressure applications. The valve operates with no minimum hydraulic pressure required, ensuring reliable functionality across a range of conditions. Key to its operation, the DMDAXNV814N incorporates closed transitions between Spools B and R. This design choice enhances performance by providing faster and more consistent response times, particularly useful in pilot control applications where capacity is less critical. The manual override option available in models with the D or L control uses a detent mechanism designed for temporary actuation, supporting approximately 7,000 cycles throughout its mechanical lifespan. For compatibility with different system fluids, cartridges configured with EPDM seals are specifically intended for use with phosphate ester fluids; however, they must avoid exposure to petroleum-based products to prevent seal damage. Additionally, the valve's wet armature design helps manage heat during prolonged coil energization but requires careful consideration of fluid types to prevent breakdown and varnish formation. This model also benefits from interchangeable coils compatible with other Sun Series 1 solenoid products and features a floating style construction that minimizes internal part binding due to installation or machining variations. With a maximum capacity of 12 gpm (45 L/min) and quick typical response times around 50 ms, the DMDAXNV814N is an efficient solution for advanced hydraulic systems requiring precise control and reliability.
The Sun Hydraulics DMDAXNV814N (DMDAXNV814N) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for precise hydraulic control. This direct-acting, balanced spool directional valve features a robust design with a fatigue rating of 5000 psi (350 bar), making it suitable for high-pressure applications. The valve operates with no minimum hydraulic pressure required, ensuring reliable functionality across a range of conditions. Key to its operation, the DMDAXNV814N incorporates closed transitions between Spools B and R. This design choice enhances performance by providing faster and more consistent response times, particularly useful in pilot control applications where capacity is less critical. The manual override option available in models with the D or L control uses a detent mechanism designed for temporary actuation, supporting approximately 7,000 cycles throughout its mechanical lifespan. For compatibility with different system fluids, cartridges configured with EPDM seals are specifically intended for use with phosphate ester fluids; however, they must avoid exposure to petroleum-based products to prevent seal damage. Additionally, the valve's wet armature design helps manage heat during prolonged coil energization but requires careful consideration of fluid types to prevent breakdown and varnish formation. This model also benefits from interchangeable coils compatible with other Sun Series 1 solenoid products and features a floating style construction that minimizes internal part binding due to installation or machining variations. With a maximum capacity of 12 gpm (45 L/min) and quick typical response times around 50 ms, the DMDAXNV814N is an efficient solution for advanced hydraulic systems requiring precise control and reliability.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Spools B and R are closed in the transition between their two positions. This results in a higher performance limit at the expense of lower capacity. When used as pilot controls, where capacity is not a factor, the closed transition will provide faster and more consistent response times.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ