SUN HYDRAULICS
DMDAXPN228
$193.40 USD
- SUN HYDRAULICS
- Material:DMDAXPN228
- Model:DMDA-XPN@228
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DMDAXPN228 (DMDAXPN228) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for robust hydraulic systems. This direct-acting, balanced spool directional valve ensures precise control with its capability to handle a maximum operating pressure of 5000 psi (350 bar) and a flow capacity of up to 12 gpm (45 L/min). It features a quick response time of approximately 50 ms and minimal valve leakage at high pressures. The DMDAXPN228 incorporates a wet armature design, where the working fluid surrounds the armature, suitable for systems using water-glycol mixtures although prolonged exposure at high temperatures may lead to fluid breakdown. The valve's construction includes EPDM seals specifically for use with phosphate ester fluids; however, these seals are susceptible to damage when exposed to petroleum-based fluids. This model benefits from interchangeable coils with other Sun Series 1 solenoid products and can be installed in either direction on the tube. It also uses the Sun floating style construction which minimizes internal parts binding, enhancing durability and performance reliability. The manual override feature is designed for temporary actuation with a mechanical life expectancy of around 7,000 cycles. Engineered for flexibility in application and installation, the DMDAXPN228 features a manual override force requirement of 5 lbs at 1000 psi for Port 1 and has a compact solenoid tube diameter of .75 inches (19 mm). Its robust design ensures it meets the demanding requirements of various hydraulic systems where precise fluid control is essential.
The Sun Hydraulics DMDAXPN228 (DMDAXPN228) is a high-performance solenoid-operated 3-way, 2-position cartridge valve designed for robust hydraulic systems. This direct-acting, balanced spool directional valve ensures precise control with its capability to handle a maximum operating pressure of 5000 psi (350 bar) and a flow capacity of up to 12 gpm (45 L/min). It features a quick response time of approximately 50 ms and minimal valve leakage at high pressures. The DMDAXPN228 incorporates a wet armature design, where the working fluid surrounds the armature, suitable for systems using water-glycol mixtures although prolonged exposure at high temperatures may lead to fluid breakdown. The valve's construction includes EPDM seals specifically for use with phosphate ester fluids; however, these seals are susceptible to damage when exposed to petroleum-based fluids. This model benefits from interchangeable coils with other Sun Series 1 solenoid products and can be installed in either direction on the tube. It also uses the Sun floating style construction which minimizes internal parts binding, enhancing durability and performance reliability. The manual override feature is designed for temporary actuation with a mechanical life expectancy of around 7,000 cycles. Engineered for flexibility in application and installation, the DMDAXPN228 features a manual override force requirement of 5 lbs at 1000 psi for Port 1 and has a compact solenoid tube diameter of .75 inches (19 mm). Its robust design ensures it meets the demanding requirements of various hydraulic systems where precise fluid control is essential.
This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- Spools B and R are closed in the transition between their two positions. This results in a higher performance limit at the expense of lower capacity. When used as pilot controls, where capacity is not a factor, the closed transition will provide faster and more consistent response times.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 12 gpm45 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-411-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ