SUN HYDRAULICS
DNCADBN2E24V
$365.84 USD
- SUN HYDRAULICS
- Material:DNCADBN2E24V
- Model:DNCA-DBN@2E24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCADBN2E24V (DNCADBN2E24V) is a high-performance, solenoid-operated, 4-way, 2-position cartridge valve designed for precise control in hydraulic systems. This direct-acting, balanced spool directional valve features a closed transition between positions, which minimizes the loss of oil during shifting\u2014a crucial factor in maintaining efficiency in pilot control circuits. With its robust construction, the valve is configured to handle a maximum operating pressure of 5000 psi (350 bar) and has a flow capacity of 8 gpm (30 L/min), making it suitable for a variety of demanding applications. This model boasts an exceptional response time of approximately 50 ms and maintains tight control over leakage with a maximum rate of 10 in\u00b3/min at 3000 psi. It supports up to 15,000 switching cycles per hour, ensuring reliable performance under frequent operation conditions. The DNCADBN2E24V utilizes a wet armature design; thus, the working fluid directly cools the armature but also subjects it to heat from the coil if energized continuously. For enhanced durability and environmental resistance, Sun Hydraulics offers various coil termination and voltage options including models with surge protection. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Furthermore, this model incorporates Sun's floating style construction which reduces risks of internal parts binding due to installation torque or machining variations in the cavity/cartridge setup. The DNCADBN2E24V is equipped with EPDM seals specifically for use with phosphate ester fluids; however, exposure to petroleum-based fluids should be avoided as it can damage these seals. This versatile component is ideal for applications requiring reliable shifting and precise control under high-pressure conditions.
The Sun Hydraulics DNCADBN2E24V (DNCADBN2E24V) is a high-performance, solenoid-operated, 4-way, 2-position cartridge valve designed for precise control in hydraulic systems. This direct-acting, balanced spool directional valve features a closed transition between positions, which minimizes the loss of oil during shifting\u2014a crucial factor in maintaining efficiency in pilot control circuits. With its robust construction, the valve is configured to handle a maximum operating pressure of 5000 psi (350 bar) and has a flow capacity of 8 gpm (30 L/min), making it suitable for a variety of demanding applications. This model boasts an exceptional response time of approximately 50 ms and maintains tight control over leakage with a maximum rate of 10 in\u00b3/min at 3000 psi. It supports up to 15,000 switching cycles per hour, ensuring reliable performance under frequent operation conditions. The DNCADBN2E24V utilizes a wet armature design; thus, the working fluid directly cools the armature but also subjects it to heat from the coil if energized continuously. For enhanced durability and environmental resistance, Sun Hydraulics offers various coil termination and voltage options including models with surge protection. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Furthermore, this model incorporates Sun's floating style construction which reduces risks of internal parts binding due to installation torque or machining variations in the cavity/cartridge setup. The DNCADBN2E24V is equipped with EPDM seals specifically for use with phosphate ester fluids; however, exposure to petroleum-based fluids should be avoided as it can damage these seals. This versatile component is ideal for applications requiring reliable shifting and precise control under high-pressure conditions.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ