SUN HYDRAULICS
DNCADCN524
$166.49 USD
- SUN HYDRAULICS
- Material:DNCADCN524
- Model:DNCA-DCN@524
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCADCN524 (DNCADCN524) is a high-performance, solenoid-operated, 4-way, 2-position cartridge valve designed for precision hydraulic control. This direct-acting, balanced spool directional valve features a closed transition between positions, minimizing oil loss during shifting\u2014ideal for use in pilot control circuits where maintaining hydraulic integrity is crucial. The valve operates with a maximum capacity of 8 gpm/30 L/min and can handle pressures up to 5000 psi/350 bar. It is particularly noted for its robust solenoid tube assembly which is fatigue rated for high-pressure service. The DNCADCN524 valve requires no minimum hydraulic pressure to function and incorporates EPDM seals specifically for use with phosphate ester fluids; however, these seals are susceptible to damage when exposed to petroleum-based substances. Its wet armature design allows the working fluid to surround the armature, mitigating heat build-up from the coil during prolonged energization. Users should note that certain fluids may degrade under sustained heat, potentially impacting valve performance. Sun Hydraulics has equipped this model with various coil termination and voltage options, including configurations with surge protection. The coils are interchangeable with other Sun Series 1 solenoid products and can be installed in either orientation on the tube. For environmental resilience, additional weatherized coils and kits are available. This model also benefits from Sun\u2019s floating style construction which reduces the risk of internal parts binding due to improper installation torque or machining discrepancies in the cavity/cartridge setup. With a swift response time of approximately 50 ms and capable of up to 15,000 switching cycles per hour, the DNCADCN524 offers reliable and efficient operation suited for demanding hydraulic applications.
The Sun Hydraulics DNCADCN524 (DNCADCN524) is a high-performance, solenoid-operated, 4-way, 2-position cartridge valve designed for precision hydraulic control. This direct-acting, balanced spool directional valve features a closed transition between positions, minimizing oil loss during shifting\u2014ideal for use in pilot control circuits where maintaining hydraulic integrity is crucial. The valve operates with a maximum capacity of 8 gpm/30 L/min and can handle pressures up to 5000 psi/350 bar. It is particularly noted for its robust solenoid tube assembly which is fatigue rated for high-pressure service. The DNCADCN524 valve requires no minimum hydraulic pressure to function and incorporates EPDM seals specifically for use with phosphate ester fluids; however, these seals are susceptible to damage when exposed to petroleum-based substances. Its wet armature design allows the working fluid to surround the armature, mitigating heat build-up from the coil during prolonged energization. Users should note that certain fluids may degrade under sustained heat, potentially impacting valve performance. Sun Hydraulics has equipped this model with various coil termination and voltage options, including configurations with surge protection. The coils are interchangeable with other Sun Series 1 solenoid products and can be installed in either orientation on the tube. For environmental resilience, additional weatherized coils and kits are available. This model also benefits from Sun\u2019s floating style construction which reduces the risk of internal parts binding due to improper installation torque or machining discrepancies in the cavity/cartridge setup. With a swift response time of approximately 50 ms and capable of up to 15,000 switching cycles per hour, the DNCADCN524 offers reliable and efficient operation suited for demanding hydraulic applications.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ