SUN HYDRAULICS
DNCADJN528

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCADJN528 (DNCADJN528) is a high-performance, solenoid-operated, 4-way, 2-position cartridge valve designed for precise control in hydraulic systems. It features a direct-acting, balanced spool with a closed transition between positions, minimizing oil loss during shifting\u2014ideal for pilot control circuits where maintaining fluid integrity is critical. The valve operates effectively with a capacity of 8 gpm/30 L/min and can handle maximum operating pressures up to 5000 psi/350 bar. Notably, the DNCADJN528 does not require minimum hydraulic pressure for operation and incorporates a wet armature design. This model is compatible with EPDM seals specifically for use with phosphate ester fluids; however, it is crucial to avoid exposure to petroleum-based substances that could compromise the seal integrity. The solenoid tube assembly of this valve is fatigue rated for demanding applications. With its robust magnetic design, the solenoid ensures efficient operation and reliable spool actuation, maximizing performance per watt expended. Sun Hydraulics has equipped the DNCADJN528 with various coil termination and voltage options, including models with surge protection and environmental shielding up to IP69K standards for enhanced durability in harsh conditions. The interchangeable coils are consistent with other Sun Series 1 solenoid products and can be mounted in either direction to accommodate different system configurations. Additionally, this model benefits from Sun's floating style construction which helps prevent internal part binding due to installation torque or variations in cavity/cartridge machining. With its swift response time of approximately 50 ms and capability for up to 15,000 switching cycles per hour, the DNCADJN528 is an effective solution for dynamic system requirements requiring frequent actuations. This valve's thoughtful engineering ensures it meets stringent performance criteria while providing reliable service in complex hydraulic setups.