SUN HYDRAULICS
DNCALWN223
$193.40 USD
- SUN HYDRAULICS
- Material:DNCALWN223
- Model:DNCA-LWN@223
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCALWN223 (DNCALWN223) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, significantly reducing oil loss during shifting, which is crucial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; reverse flow is possible but not recommended due to performance limitations. The solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), ensuring robust service life. This valve operates without requiring minimum hydraulic pressure and utilizes EPDM seals suitable for phosphate ester fluid systems while being incompatible with petroleum-based fluids. The DNCALWN223 employs a wet armature design, where the working fluid surrounds the armature and absorbs heat from the coil. This feature should be considered if the coil remains energized over extended periods, especially with water-glycol mixtures that may degrade into varnishes affecting functionality. It offers various coil termination and voltage options, enhancing flexibility in different applications. The solenoid's magnetic design maximizes efficiency by delivering high spool actuating force per watt consumed. This model incorporates Sun's floating style construction to minimize internal binding risks due to installation torque or cavity machining variations. It fits into T-31A cavities and belongs to Series 1 with an 8 gpm (30 L/min) capacity and a maximum operating pressure of 5000 psi (350 bar). The typical response time is 50 ms, with a maximum leakage of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). It supports up to 15,000 cycles per hour switching frequency and requires minimal manual override force and stroke for operation adjustments.
The Sun Hydraulics DNCALWN223 (DNCALWN223) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, significantly reducing oil loss during shifting, which is crucial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; reverse flow is possible but not recommended due to performance limitations. The solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), ensuring robust service life. This valve operates without requiring minimum hydraulic pressure and utilizes EPDM seals suitable for phosphate ester fluid systems while being incompatible with petroleum-based fluids. The DNCALWN223 employs a wet armature design, where the working fluid surrounds the armature and absorbs heat from the coil. This feature should be considered if the coil remains energized over extended periods, especially with water-glycol mixtures that may degrade into varnishes affecting functionality. It offers various coil termination and voltage options, enhancing flexibility in different applications. The solenoid's magnetic design maximizes efficiency by delivering high spool actuating force per watt consumed. This model incorporates Sun's floating style construction to minimize internal binding risks due to installation torque or cavity machining variations. It fits into T-31A cavities and belongs to Series 1 with an 8 gpm (30 L/min) capacity and a maximum operating pressure of 5000 psi (350 bar). The typical response time is 50 ms, with a maximum leakage of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). It supports up to 15,000 cycles per hour switching frequency and requires minimal manual override force and stroke for operation adjustments.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ