SUN HYDRAULICS
DNCALXN824
$169.67 USD
- SUN HYDRAULICS
- Material:DNCALXN824
- Model:DNCA-LXN@824
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCALXN824 (DNCALXN824) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a closed transition between positions, significantly reducing oil loss during shifting, which is particularly beneficial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; although reverse flow is possible, it is not recommended due to potential performance issues. The solenoid tube assembly is fatigue-rated for service at pressures up to 5000 psi (350 bar), ensuring durability and reliability. This valve operates without requiring a minimum hydraulic pressure due to its direct actuation design. It employs EPDM seals suitable for systems using phosphate ester fluids but cautions against exposure to petroleum-based fluids which can damage the seals. Its wet armature design allows working fluid exposure to coil-generated heat, a consideration when coils are energized for prolonged periods as some fluids may degrade under these conditions. A variety of coil termination and voltage options are available, with or without surge protection, offering flexibility in configuration. The solenoid\u2019s efficient magnetic design delivers high spool actuating force per watt expended, promoting reliable valve shifting. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube, with connector options rated up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize binding risks due to excessive installation torque or machining variations in cavity/cartridge interfaces. It has a capacity of 8 gpm (30 L/min), a typical response time of 50 ms, and supports switching frequencies up to 15,000 cycles per hour. Manual override features include a force requirement of 5 lbs/1000 psi at Port 1 and an override stroke of .10 inches (2.5 mm).
The Sun Hydraulics DNCALXN824 (DNCALXN824) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a closed transition between positions, significantly reducing oil loss during shifting, which is particularly beneficial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; although reverse flow is possible, it is not recommended due to potential performance issues. The solenoid tube assembly is fatigue-rated for service at pressures up to 5000 psi (350 bar), ensuring durability and reliability. This valve operates without requiring a minimum hydraulic pressure due to its direct actuation design. It employs EPDM seals suitable for systems using phosphate ester fluids but cautions against exposure to petroleum-based fluids which can damage the seals. Its wet armature design allows working fluid exposure to coil-generated heat, a consideration when coils are energized for prolonged periods as some fluids may degrade under these conditions. A variety of coil termination and voltage options are available, with or without surge protection, offering flexibility in configuration. The solenoid\u2019s efficient magnetic design delivers high spool actuating force per watt expended, promoting reliable valve shifting. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube, with connector options rated up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize binding risks due to excessive installation torque or machining variations in cavity/cartridge interfaces. It has a capacity of 8 gpm (30 L/min), a typical response time of 50 ms, and supports switching frequencies up to 15,000 cycles per hour. Manual override features include a force requirement of 5 lbs/1000 psi at Port 1 and an override stroke of .10 inches (2.5 mm).
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ