SUN HYDRAULICS
DNCALZV624
$172.15 USD
- SUN HYDRAULICS
- Material:DNCALZV624
- Model:DNCA-LZV@624
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCALZV624 (DNCALZV624) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, which significantly reduces oil loss during shifting\u2014a crucial factor in pilot control circuits. It is optimized with port 3 as the inlet and port 1 as the tank; reverse flow is possible but not recommended due to performance limitations. The solenoid tube assembly is fatigue-rated for service up to 5000 psi (350 bar), and the valve operates without requiring minimum hydraulic pressure. This model is compatible with systems using phosphate ester fluids when configured with EPDM seals; however, these seals are susceptible to damage from petroleum-based fluids. The DNCALZV624 utilizes a wet armature design where the working fluid surrounds the armature, potentially affecting function if exposed to prolonged coil-generated heat\u2014especially in water-glycol mixtures that degrade over time. The solenoid's magnetic design offers high efficiency, providing substantial spool actuating force per Watt expended for reliable operation. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted bi-directionally on the tube. Coil connector options support ratings up to IP69K for enhanced environmental protection. Key specifications include a cavity size of T31A, a capacity of 8 gpm (30 L/min.), and a maximum operating pressure of 5000 psi (350 bar). The typical response time is around 50 ms, with maximum valve leakage at specified conditions being 10 in\u00b3/min (160 cc/min). It supports a switching frequency of up to 15,000 cycles per hour. The manual override requires minimal force and has a stroke of .10 inches (2.5 mm). The valve's installation torque ranges from 30 to 35 lbf-ft (41 to 47 Nm), and it incorporates Sun's floating style construction to minimize binding risks due to installation or machining variations.
The Sun Hydraulics DNCALZV624 (DNCALZV624) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, which significantly reduces oil loss during shifting\u2014a crucial factor in pilot control circuits. It is optimized with port 3 as the inlet and port 1 as the tank; reverse flow is possible but not recommended due to performance limitations. The solenoid tube assembly is fatigue-rated for service up to 5000 psi (350 bar), and the valve operates without requiring minimum hydraulic pressure. This model is compatible with systems using phosphate ester fluids when configured with EPDM seals; however, these seals are susceptible to damage from petroleum-based fluids. The DNCALZV624 utilizes a wet armature design where the working fluid surrounds the armature, potentially affecting function if exposed to prolonged coil-generated heat\u2014especially in water-glycol mixtures that degrade over time. The solenoid's magnetic design offers high efficiency, providing substantial spool actuating force per Watt expended for reliable operation. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted bi-directionally on the tube. Coil connector options support ratings up to IP69K for enhanced environmental protection. Key specifications include a cavity size of T31A, a capacity of 8 gpm (30 L/min.), and a maximum operating pressure of 5000 psi (350 bar). The typical response time is around 50 ms, with maximum valve leakage at specified conditions being 10 in\u00b3/min (160 cc/min). It supports a switching frequency of up to 15,000 cycles per hour. The manual override requires minimal force and has a stroke of .10 inches (2.5 mm). The valve's installation torque ranges from 30 to 35 lbf-ft (41 to 47 Nm), and it incorporates Sun's floating style construction to minimize binding risks due to installation or machining variations.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ