SUN HYDRAULICS
DNCAMBV2E24V
$345.00 USD
- SUN HYDRAULICS
- Material:DNCAMBV2E24V
- Model:DNCA-MBV@2E24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMBV2E24V (DNCAMBV2E24V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. With a closed transition between positions, it minimizes oil loss during shifting, which is crucial for pilot control circuits. The valve\u2019s capacity is optimized with port 3 as the inlet and port 1 as the tank; however, reverse flow is not recommended due to potential performance issues. It features a fatigue-rated solenoid tube assembly suitable for up to 5000 psi (350 bar) service and operates without requiring minimum hydraulic pressure. This valve accommodates systems using phosphate ester fluids with EPDM-sealed cartridges but warns against exposure to petroleum-based substances. The design includes a wet armature where the working fluid surrounds the armature, impacting performance if the coil remains energized for extended periods. A variety of coil options are available to suit different voltage requirements and environmental conditions; coils are interchangeable with other Sun Series 1 products and can be mounted in either direction. The solenoid's high efficiency ensures reliable operation through significant actuating force per watt expended. Additional specifications include a cavity size of T31A, series designation of 1, capacity of up to 8 gpm (30 L/min), and a response time of approximately 50 ms. The maximum leakage at specified conditions is limited to 10 in\u00b3/min (160 cc/min), while it supports switching frequencies up to 15000 cycles/hr. Installation requires specific torque settings and manual override capabilities are provided for ease of use. The valve incorporates Sun\u2019s floating style construction to prevent internal part binding from excessive torque or machining variations.
The Sun Hydraulics DNCAMBV2E24V (DNCAMBV2E24V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. With a closed transition between positions, it minimizes oil loss during shifting, which is crucial for pilot control circuits. The valve\u2019s capacity is optimized with port 3 as the inlet and port 1 as the tank; however, reverse flow is not recommended due to potential performance issues. It features a fatigue-rated solenoid tube assembly suitable for up to 5000 psi (350 bar) service and operates without requiring minimum hydraulic pressure. This valve accommodates systems using phosphate ester fluids with EPDM-sealed cartridges but warns against exposure to petroleum-based substances. The design includes a wet armature where the working fluid surrounds the armature, impacting performance if the coil remains energized for extended periods. A variety of coil options are available to suit different voltage requirements and environmental conditions; coils are interchangeable with other Sun Series 1 products and can be mounted in either direction. The solenoid's high efficiency ensures reliable operation through significant actuating force per watt expended. Additional specifications include a cavity size of T31A, series designation of 1, capacity of up to 8 gpm (30 L/min), and a response time of approximately 50 ms. The maximum leakage at specified conditions is limited to 10 in\u00b3/min (160 cc/min), while it supports switching frequencies up to 15000 cycles/hr. Installation requires specific torque settings and manual override capabilities are provided for ease of use. The valve incorporates Sun\u2019s floating style construction to prevent internal part binding from excessive torque or machining variations.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ