SUN HYDRAULICS
DNCAMCN712
$136.71 USD
- SUN HYDRAULICS
- Material:DNCAMCN712
- Model:DNCA-MCN@712
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMCN712 (DNCAMCN712) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. It features a closed transition between positions to minimize oil loss during shifting, making it particularly useful in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to potential performance issues. The solenoid tube assembly of this model is fatigue-rated for service up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. This valve requires no minimum hydraulic pressure for operation and utilizes EPDM seals suitable for systems with phosphate ester fluids, while exposure to petroleum-based fluids can damage these seals. Its wet armature design allows the working fluid to surround the armature, which can be affected by heat generated by the coil over prolonged periods, particularly with water-glycol mixtures that may form varnishes affecting function. The DNCAMCN712 offers various coil termination and voltage options, including surge protection, and its high-efficiency magnetic design provides significant spool actuating force per watt expended. This ensures reliable valve shifting with interchangeable coils compatible with other Sun Series 1 solenoid products. Coil connector options support ratings up to IP69K for enhanced environmental protection. Additionally, this model incorporates Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or machining variations. With a capacity of 8 gpm (30 L/min) and a typical response time of 50 ms, this valve supports a maximum operating pressure of 5000 psi (350 bar) and can handle switching frequencies up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 with a stroke length of .10 inches (2.5 mm).
The Sun Hydraulics DNCAMCN712 (DNCAMCN712) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. It features a closed transition between positions to minimize oil loss during shifting, making it particularly useful in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to potential performance issues. The solenoid tube assembly of this model is fatigue-rated for service up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. This valve requires no minimum hydraulic pressure for operation and utilizes EPDM seals suitable for systems with phosphate ester fluids, while exposure to petroleum-based fluids can damage these seals. Its wet armature design allows the working fluid to surround the armature, which can be affected by heat generated by the coil over prolonged periods, particularly with water-glycol mixtures that may form varnishes affecting function. The DNCAMCN712 offers various coil termination and voltage options, including surge protection, and its high-efficiency magnetic design provides significant spool actuating force per watt expended. This ensures reliable valve shifting with interchangeable coils compatible with other Sun Series 1 solenoid products. Coil connector options support ratings up to IP69K for enhanced environmental protection. Additionally, this model incorporates Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or machining variations. With a capacity of 8 gpm (30 L/min) and a typical response time of 50 ms, this valve supports a maximum operating pressure of 5000 psi (350 bar) and can handle switching frequencies up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 with a stroke length of .10 inches (2.5 mm).
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ