SUN HYDRAULICS
DNCAMCN836
$143.56 USD
- SUN HYDRAULICS
- Material:DNCAMCN836
- Model:DNCA-MCN@836
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMCN836 (DNCAMCN836) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This valve is engineered for precision with a closed transition between positions, significantly minimizing oil loss during shifting\u2014a crucial advantage in pilot control circuits. It is optimized for use with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to performance limitations. The valve's solenoid tube assembly is fatigue-rated for service up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. It operates without the need for minimum hydraulic pressure thanks to its direct-actuated mechanism. This model incorporates EPDM seals suitable for systems utilizing phosphate ester fluids; however, these seals are incompatible with petroleum-based fluids, which can cause damage. The wet armature design exposes the working fluid to coil-generated heat, which may affect certain fluids over time. A broad selection of coil termination and voltage options are available, including models with surge protection. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per watt expended. Interchangeability of coils with other Sun Series 1 solenoid products offers flexibility in installation direction on the tube. Coil connector options provide ratings up to IP69K for robust environmental protection, with additional weatherized coils and kits available. The valve employs Sun\u2019s floating style construction to reduce the risk of internal binding from excessive torque or cavity machining variations. Key specifications include a capacity of 8 gpm (30 L/min), maximum operating pressure of 5000 psi (350 bar), typical response time of 50 ms, and maximum leakage rate at specified conditions of 10 in\u00b3/min (160 cc/min). Manual override features include a force requirement of 5 lbs/1000 psi and a stroke length of .10 inches (2.5 mm).
The Sun Hydraulics DNCAMCN836 (DNCAMCN836) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This valve is engineered for precision with a closed transition between positions, significantly minimizing oil loss during shifting\u2014a crucial advantage in pilot control circuits. It is optimized for use with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to performance limitations. The valve's solenoid tube assembly is fatigue-rated for service up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. It operates without the need for minimum hydraulic pressure thanks to its direct-actuated mechanism. This model incorporates EPDM seals suitable for systems utilizing phosphate ester fluids; however, these seals are incompatible with petroleum-based fluids, which can cause damage. The wet armature design exposes the working fluid to coil-generated heat, which may affect certain fluids over time. A broad selection of coil termination and voltage options are available, including models with surge protection. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per watt expended. Interchangeability of coils with other Sun Series 1 solenoid products offers flexibility in installation direction on the tube. Coil connector options provide ratings up to IP69K for robust environmental protection, with additional weatherized coils and kits available. The valve employs Sun\u2019s floating style construction to reduce the risk of internal binding from excessive torque or cavity machining variations. Key specifications include a capacity of 8 gpm (30 L/min), maximum operating pressure of 5000 psi (350 bar), typical response time of 50 ms, and maximum leakage rate at specified conditions of 10 in\u00b3/min (160 cc/min). Manual override features include a force requirement of 5 lbs/1000 psi and a stroke length of .10 inches (2.5 mm).
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ