SUN HYDRAULICS
DNCAMCV71299
$161.43 USD
- SUN HYDRAULICS
- Material:DNCAMCV71299
- Model:DNCA-MCV@71299
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMCV71299 (DNCAMCV71299) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, which minimizes oil loss during shifting\u2014a critical factor in pilot control circuits. It is configured with port 3 as the inlet and port 1 as the tank; while reverse flow is possible, it is not recommended due to potential performance issues. The solenoid tube assembly of this valve is fatigue-rated for service pressures up to 5000 psi (350 bar), ensuring durability and reliability under demanding conditions. The DNCAMCV71299 requires no minimum hydraulic pressure for operation and incorporates a wet armature design where the working fluid surrounds the armature. This can affect performance if the coil remains energized for extended periods, especially with certain fluids like water-glycol mixtures that may degrade over time. The valve offers various coil termination and voltage options, including surge protection, allowing customization based on application needs. Its high-efficiency solenoid design provides significant spool actuating force per watt expended, ensuring reliable shifting. This model supports interchangeable coils with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. The coil connector options boast ratings up to IP69K for enhanced environmental protection. Additional weatherized coils and kits are available for even greater resilience against harsh conditions. The valve employs Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or cavity/cartridge machining variations. With a capacity of 8 gpm (30 L/min) and a typical response time of 50 ms, this valve suits applications requiring rapid switching cycles\u2014up to 15,000 cycles per hour\u2014and low leakage rates at specified conditions. It also features manual override capabilities with specific force requirements and stroke dimensions for user convenience during manual operations.
The Sun Hydraulics DNCAMCV71299 (DNCAMCV71299) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, which minimizes oil loss during shifting\u2014a critical factor in pilot control circuits. It is configured with port 3 as the inlet and port 1 as the tank; while reverse flow is possible, it is not recommended due to potential performance issues. The solenoid tube assembly of this valve is fatigue-rated for service pressures up to 5000 psi (350 bar), ensuring durability and reliability under demanding conditions. The DNCAMCV71299 requires no minimum hydraulic pressure for operation and incorporates a wet armature design where the working fluid surrounds the armature. This can affect performance if the coil remains energized for extended periods, especially with certain fluids like water-glycol mixtures that may degrade over time. The valve offers various coil termination and voltage options, including surge protection, allowing customization based on application needs. Its high-efficiency solenoid design provides significant spool actuating force per watt expended, ensuring reliable shifting. This model supports interchangeable coils with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. The coil connector options boast ratings up to IP69K for enhanced environmental protection. Additional weatherized coils and kits are available for even greater resilience against harsh conditions. The valve employs Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or cavity/cartridge machining variations. With a capacity of 8 gpm (30 L/min) and a typical response time of 50 ms, this valve suits applications requiring rapid switching cycles\u2014up to 15,000 cycles per hour\u2014and low leakage rates at specified conditions. It also features manual override capabilities with specific force requirements and stroke dimensions for user convenience during manual operations.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ